Walbro High Performance Fuel Pump Kit 255 LPH Without California Emissions 1998

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 146.01ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • 255 Liters Per Hour
  • High Pressure Capacity
  • Operating Pressure 0-100 PSI
  • Full Assembly
MSRP $229.99
You save 17%

Walbro 255 LPH High Performance Fuel Pump Kit for all 1998 Mustangs without California Emissions.

A newly available piece of equipment provided to you by Walbro, this 255 LPH High Performance Fuel Pump Kit is compatible with all 1998 Mustangs without California Emissions. Made as a high performance version, this fuel pump kit will outperform the original factory issue fuel pump on your 1998 Mustang.

This Walbro 255 LPH high performance fuel pump comes with the complete housing and fuel-level sending unit, with all of the easy to follow instructions for installation provided. This kit is crafted be a direct replacement unit that will swap the entire original housing with a brand new 255 liter per hour high performance version.

Walbro Fuel Pump Features and Benefits:
- Mounted In-tank for a Secure Fit
- 255 Liters per Hour of Fuel Flow
- High Pressure Capacity for Improved Performance
- Fuel Level Sending Unit Comes Included
- Minimum Voltage of 12 Volts
- Operating Pressure of 0-100 psi, Determined by Stock Fuel Pressure Regulator
- Full Assembly Includes Canister and Wiring

Walbro Fuel Pumps are designed and produced to provide unmatched performance, longevity, reliability, and overall efficiency in fuel delivery for you 1998 Mustang. Keeping consistent amounts of fuel supplied to your 1998 Mustang's engine is required for achieving superior performance levels. This fuel pump is capable of delivering in the range of 190 to 255 liters per hour, ensuring that your Mustang stays continuously fed with the proper amount of fuel. The fuel pump system comes shipped to you completely assembled with the canister and wiring harness connections that plug directly into the factory wiring harness included.

This pump has been designed to operate at a rate of between 0 and 100 psi, the level of psi the pump uses is determined by your 1998 Mustang's stock fuel pressure regulator. This fuel pump is an aftermarket high performance piece of equipment which has the capability of supporting Mustang's sporting up to and over 500 horsepower, but remains an easily installed, direct replacement for the original fuel pump.

Please Note: This Walbro 255 LPH High Performance Fuel Pump Kit for your 1998 Mustang is not recommended for use in the state of California, as it does not meet the emissions standards set by California's Department of Motor Vehicles. For a fuel pump that is California emissions compliant, please take a look at the 255 LPH High Performance Fuel Pump Kit with California Emissions (FP226HP2).

Purchase a new Walbro 255 LPH High Performance Fuel Pump Kit without California Emissins for your 1998 Mustang from CJ Pony Parts today! 

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

  • 1998
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.28ms
  • bvseo-msg: HTTP status code of 404 was returned;

Does this fit 98 gt conv with x in vin. non CA

Asked by: Bailey107
Answered by: rk cjpp
Date published: 2020-05-28

I bought this pump assy last week & I dont find the pump strainer in this kit . Where is the strainer located in the assy , if not on the pump does it needs one? I need tro know before I proceed to intall the assy.

Asked by: Manuel
The strainer is inside the pump housing.
Answered by: rk cjpp
Date published: 2019-09-15
  • y_2020, m_7, d_9, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_FP227HP2, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 132.17ms