WeatherTech TechLiner Tailgate Liner F-150 2015-2020/ Raptor 2017-2020

WeatherTech:
3TG08

Highlights

  • Easy Install/Removal
  • Contoured Fitment
  • Deep Channels
  • Temp Resistant
MSRP $78.15
$68.95
You save 12%

WeatherTech TechLiner Tailgate Liner for 2015, 2016, 2017, 2018, 2019 and 2020 F-150s and 2017, 2018, 2019 and 2020 F-150 Raptors.

This WeatherTech (3TG08) TechLiner Tailgate Liner is custom fit to F-150s like yours and seamlessly lines your truck bed and tailgate down to the exact contours! The effortless protection against scratches, dents and other damage is all thanks to 100% recyclable and odorless thermoplastic elastomer. This sustainable solution can be installed and removed for simple clean up after those particularly tough loads. 

Features & Benefits:
- Easy Installation and Removal
- Seamless Custom Fitting to Truck Bed and Tailgate
- Protects Against Scratches, Dents and Paint Damage
- Made of 100% Recyclable and Odorless Thermoplastic Elastomer
- Durable, Flexible and UV-Resistant
- “Soft Touch” Material Keep Cargo from Shifting
- Remains Flexible through Wide Temperature Range
- Works with Other Rigid Bed Liners
- Made in the USA

The liner's “soft touch” material will prevent cargo from shifting and make unloading a breeze! It won’t crack, break or warp and remains flexible through wide temperature ranges.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

Today on CJ Off-Road we're going to quickly add some protection to the bed of our F150.

When we got this 2016 F150, it didn't come with a bedlinen, so the bed pretty much immediately started getting abused, so today we're going to protect it from future damage by installing this WeatherTech bed and tailgate tech liner. This is WeatherTech's bed and tailgate tech liner for your 2015 - 2018 F150 and Raptor. They are sold individually, but today we're installing them together, because it just makes sense. They're made of high quality thermoplastic material with a durable, flexible and chemical resistant black finish to keep your bed and tailgate protected and looking good. They're designed to perfectly contour your truck for a nice, sleek look, and they're easy to remove for cleaning. For fitment and pricing of these tech liners, click the links in the description down below. Now, let's get to the installation.

The first thing you want to do before you install this bedlinen is lay it face down for a couple of hours to make sure it gets into its proper shape. To make this install a little easier, we're going to lower and then remove the tailgate, and then clean the bed with soap and water, and then glass cleaner. Remove the tailgate cables. Before the tailgate can be removed you need to disconnect the wiring harness that goes to it, and now it can be removed. Line up the slot on the tailgate, and then remove it. Wipe down your entire bed with the soap and water, and then the glass cleaner to make sure it is perfectly clean and that the adhesive can stick to it.

Once your bed is clean, you can slide the tech liner into place. Now, if you flip this up, you'll notice there is a bunch of sticky pads on the back of here. Now, what you need to do is locate where each one is, then you can use the provided alcohol wipes to wipe the area of the bed where the sticky pads are going to adhere to. Okay, so get an idea of where they're going to stick, and then clean the bed. Now, this tech liner is covered in these sticky pads. We're only going to show you doing these three, but make sure you get all of them. Then just repeat this process for the rest of the sticky pads. Then you're going to peel off the backing to the sticky pads to stick them to the bed. Push down for about 15 seconds on each one to make sure it's nice and secure.

Reinstall your tailgate. If you're having trouble with the tech liner contouring to the bed of your truck, put some weights on the corners and it will form nicely, or let it sit in the sun a little bit longer. Now we're going to move on to the tailgate liner.

Now with the tailgate tech liner, just like the bed, you want to clean the whole surface with soap and water, and then glass cleaner to make sure it is perfectly clean. Use the provided T-25 torque spit in the kit and remove these four screws, but loosen these four. Use the three plastic trim pieces from the kit and install them onto the access panel. Make sure they're flush against each other. Tighten the four screws that we previously loosened. Place the tailgate liner onto the tailgate and slide this edge under the trim that you just installed. Make sure all your holes are lined up. Place the factory screws through the provided plastic washers, then install these onto the tailgate liner. Get them all started before you tighten them down. Pull back on the front of the tailgate liner and you'll notice that there's four Velcro pads on here. What you'll want to do is find out where they're going to stick onto the tailgate, and then clean that surface with the provided alcohol wipe. Then peel off the backing to the sticky pads. Then press it onto the tailgate. Put pressure on the Velcro to make sure it sticks, then our installation for this bed and tailgate liner is done.

Okay, we've got our WeatherTech tailgate and bed tech liners installed. They definitely make this truck look a lot cleaner in the bed. You don't see the scratches and damage anymore. It's going to keep it protected from future damage, and installing this really was simple. All you have to do is really clean the bed. It should take you less than an hour to do both, and before you know it, you'll be heading off road.

Vehicle Fitment

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.