Wilwood Disc Brake Kit W/ EPB Rear For 9” Big Bearing Ford Axles W/ 2-9/25” Axle Offset Bronco 1966-1977

Rejuvenate your 1966-1977 Bronco’s brake system with this Wilwood Rear Disc Brake Kit with an Electronic Parking Brake! For a perfect fit, this kit is designed for vehicles with big bearing 9” axles with a 2.36” offset and an 11”x1-3/4” drum spindle. To replace your worn-out setup, this kit is complete with billet aluminum Dynalite calipers, one-piece rotors, high-friction brake pads, and an electronic rear parking brake.

Features and Benefits:
- Durable forged billet aluminum 4-piston calipers
- High-friction pads for balanced front/rear braking
- Calipers W/ single-split bridge & spacer-less design
- Increased resistance to deflection & caliper separation
- Rotors are precision machined and corrosion-resistant 
- Electronic parking brake does not require cable rerouting
- EPB caliper designed for superior static holding power
- Simple EPB installation W/ included controller, harness, and switch assembly
- EPB is available in black or red powder-coat finishes
- Plain or drilled/slotted rotor options available
- Made in the USA

For enhanced strength and performance, the rear brake calipers have a single-split bridge and a spacer-less design. These calipers undergo stress-flow forging, realigning the metal’s grain structure with the contour of the caliper body to eliminate breaks and interruptions. An FEA-generated radial transition design is incorporated in the caliper’s transition area to increase its resistance to separation under load and deflection!

The included electronic rear parking brake (EPB) does not require a mechanical cable connection, making installation simple. The EPB caliper has high-torque holding power, which ensures secure parking. To further ease the installation process, the EPB comes with its respective controller, harness, and switch assembly. This innovative EPB comes in your choice of a red or black powder-coat finish!

To suit your unique needs, this kit comes with either plain or drilled/slotted rotors. The plain rotors are Wilwood Ultralite HP 32 Vane rotors, which are close tolerance machined with smooth turned pad faces. These rotors have additional mass to increase longevity, making them perfect for everyday cruising. The drilled/slotted rotors are designed for high-performance driving and have a directional cross-drill and face slot pattern, reducing pad glaze and minimizing build-up. For flatness, parallelism, and radial run-out on long-grain iron castings, these rotors are precision-machined to less than 0.001 tolerance. These corrosion-resistant rotors are designed to be aesthetically pleasing and have a black electro coat!

Vehicle Fitment:
- 1966-1977 Ford Bronco
- Fits big bearing Ford 9” axles with a 2.36” axle offset and an 11” x 1-3/4” drum spindle
- Plain rotors fit 5” x 5-1/2” wheel bolt circles
- Drilled rotors fit 5” x 4-1/2” and 5” x 5-1/2” wheel bolt circles

Kit Includes:
- Four-piston internal rear brake calipers
- Electronic rear parking brake 
- One-piece rotors (plain or drilled/slotted)
- High-friction brake pads

Specifications:
- Plain rotors: 12.19” diameter, 0.81” thick 
- Drilled/Slotted rotors: 12.19” diameter, 0.81” thick

Please Note: This kit will work with most 15” or larger wheel diameters.