Baer Tracker adjustable tie rod ends for your 1967-1969 Mustang.Understanding Bump Steer:
Lowering a vehicle or altering its caster and/or camber can lead to unsafe driving conditions, commonly called "bump steer." Simple maneuvers, such as hard braking, cornering or traveling over road-surface irregularities, can cause the vehicle to dart in an unexpected direction.
Baer Trackers? solve this problem! The pin-height-adjustable tie rods allow compensation for ride height and suspension geometry changes, enabling a more optimal range of articulation between the tie rod and
the steering arm. Steering geometry is optimized and
bump steer is eradicated. To adjust the tie rod height, simply move the steel spacers from top to bottom on either side of the spherical bearings.
? Hardened chrome-moly pins
? Teflon-lined chrome-moly spherical bearings
? Aluminum sleeves
-Pair of tapered pins
-Pair of Teflon lined Heims
-Nylock, lock nuts for pin end and jam nuts as needed per application.
Similar Mustang PartsMore Bumpsteer Kits
Product ReviewsWrite a review
Baer Bumpsteer Kit 1967-1969 is rated out of 5 by 1.
Rated 5 out of 5 by JeffH from Super easy ! I purchased this item due to my problem with significant bump-steer. Super easy install. Very high quality piece. Solved my problem.
Date published: 2015-01-08
Will Baer 3261002 Mustang. Bump steer kit work on a 1967 with power steering?
Yes, it will fit.
Date published: 2015-03-23
You Might Also Like
CJ's Low Price:$5,049.99
CJ's Low Price:$5,512.99
CJ's Low Price:$8,050.00
CJ's Low Price:$2,599.99
CJ's Low Price:$3,849.99