Ford Racing Crossmember Adjustable #3 1979-1993

Ford Racing: M-5059-A
MSRP: $74.95
CJ's Low Price:
1419033600 23685
Earn 67 RPM Points What's this?

Product Description

Ford Racing Adjustable Crossmember #3 for 1979-1993 Ford Mustangs.

This crossmember is a double hump design that simplifies installation of dual exhaust systems on Fox vehicles. The outer tubes are not welded to the center support, and thus can be adjusted to fit most engine/transmission combinations. It directly fits all Fox vehicles with a 4 1/2 dimension between the crossmember mounting brackets. It can be used on Fox vehicles with a 2 1/4 mounting dimension by relocating the brackets. It does not fit 1982 and later Continental or 1984 and later Mark VII, because they have a unique crossmember.

4 1/2 mounting dimension, 1980-88 T-Bird/Cougar.

4 1/2 mounting dimension, 1982-93 Mustang/Capri.

4 1/2 mounting dimension, 1982 Fairmont/Zephyr.

4 1/2 mounting dimension, 1983 and later LTD/Marquis.

2 3/4ounting dimension, 1978-81 Fairmont/Zephyr.

2 3/4 mounting dimension, 1979-81 Mustang/Capri.

2 3/4 mounting dimension, 1981-82 Granada/Monarch.

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Best for T-56
This is the one to use...
I had no problems using this for the T-56 install into my '90 Fox Coupe. This is the only cross-member with decent bushings to keep the interior quiet and vibration free. The bushings can be replaced with urethane if needed, and (I have) no clearance problems with my exhaust.
I welded new cross-member hangers onto my sub-frames and floorboards to move the cross-member back about 4.5-inches. The weight of the transmission transfers directly to the chassis in the same vertical plane as the transmission mount, so there's no torque applied to the cross-member hangers (as in other T-56 cross-members). For a daily driver, there's no need to re-enforce the hangars.
JMA July 14, 2014
1 Results

You Might Also Like