Dynacorn Complete Body Shell Fastback 1967

Dynacorn: 67FB
CJ's Low Price:
$18,499.99
1480896000 1126
Due to the purchase of this 1967 fastback body shell you might be interested in the items listed below.
Dynacorn Fender Pair 1967 - This item is a Kit
CJ's Low Price:
$446.99
Qty
CJ's Low Price:
$276.99
Qty
Earn 18499 RPM Points What's this?
Dynacorn Complete Body Shell Fastback 1967
Dynacorn Complete Body Shell Fastback 1967 Dynacorn Complete Body Shell Fastback 1967
Dynacorn

Product Description

Dynacorn Complete 1967 Fastback Mustang Body Shell.

After purchasing your 1967 Fastback and while tearing it apart to restore it you notice that your dream car is too far gone. Replace that damaged, worn out body with this complete body from Dynacorn. One of the best benefits of buying this shell is knowing that every piece of metal is brand new, no need to worry about rust appearing.

Dynacorn puts attention to detail with precisely aligning the body line to assure proper fitment throughout the body shell. This shell is a great base for stock or customize applications. All of Dynacorn bodies come coated to prevent rust from occurring. The body will need prepped primed and painted.

This body includes most of the structural parts, brackets and braces welded in place, plus the doors and deck lid are already assembled. Very little body work or adjustments are required and the hard part will be deciding on the exterior finish and the interior color option.

Sheet metal Thickness:
Trunk Floor- 0.8 to 1.0mm
Rocker Panel- 1.6 to 2.0mm
Rocker Panel Inner Brace- 3.0mm
Rear Frame Rails- 1.6 to 2.3mm
Firewall- 1.0 to 1.2mm
Torque Box- 1.0 to 1.2mm

All Dynacorn replacement body shells are encased in raw-steel 2" x 2" tube cages w/shoes for forklift transport. These cages are welded and bolted to the bottom of the shell. Prior to shipping, each shell and cage will be crated in particle board. All bodies come EDP coated but not painted.

Frequently Asked Questions:
1) What method of payment is accepted?
All orders must be paid completely in advance by cash, certified bank check, money order or wire transfer.

2) What type of delivery is available for the shell?
All deliveries will be made by a common carrier (This means you must have the shell delivered to a location that has adequate means to unload the shell). CJ Pony Parts will bill you for the exact shipping amount in which Dynacorn charges to have the body shell delivered to your address. CJ Pony Parts will contact you with the exact shipping amount once Dynacorn provides a shipping quote.


3) Will we ship this internationally?
No. Dynacorn will no longer ship body shells internationally. At your expense, we can have Dynacorn ship the body shell to a port of your choosing within the United States. After that, you must arrange shipping from the port to your international destination.

4) How do I get a title for my car?
Follow this link for information about the guidelines for each state: http://dynacornclassicbodies.com/stateseal.html

Restoring your Mustang can be a massive project. There are literally hundreds of parts that you may need to replace, and finding quality replacements can be a battle. While there are lots of choices out there, Dynacorn offers the widest selection in parts and some of the highest quality found anywhere. With their full body shells, you can order many popular Mustang bodies right from Dynacorn, from fastbacks to convertibles, allowing you to start with a brand-new body and build out your Mustang from there.

Order your brand new 1967 Fastback shell today at CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Mustang Parts  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 85.08ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

i have a 69 fastback and was considering on buying the whole body due to having a hard time getting somebody to do massive body work. can i keep my VIN and transfer it to the new body

Asked by: capt crunch
Steps to do this will vary from state to state. Unfortunately this is something that we cannot help you with other than telling you to contact someone in your department of transportation and research the legality of the situation in your area.
Answered by: CJPP Dave
Date published: 2016-11-30

I am interested in building a 1967 elenor like in the movie from start to finish, is this the body i need to start with? Do you sell the rest of the components to finish the car like the chassis, suspension, wheels/tires? 

Asked by: mustangmike3302
This would be the correct shell, We sell the rest of the components you would need to finish the car.
Answered by: rk cjpp
Date published: 2016-10-05

Is it possible to get a Dynacorn Complete Body Shell Fastback for 1965 convertible model. 

Asked by: Chevy
Yes, see P/N: MS65FB and P/N: MS65CV
Answered by: CJPP Dave
Date published: 2016-09-30

Do you also build cars or have a company in mind that can do it?and do you have 1969 mustang frames ?

Asked by: Tommy67
We do not build cars or have any recommendations for anyone who does, we do sell 69 mustang frame rails. The dynacorn 69 body shell can be found here, http://www.cjponyparts.com/dynacorn-complete-body-shell-fastback-1969/p/69FB/
Answered by: rk cjpp
Date published: 2016-08-24

what about rolling chasis for the body?

Asked by: dougone
This is not offered as a rolling chassis.
Answered by: CJPP Dave
Date published: 2016-08-08

is there also a body for the 79 mustang?

Asked by: Derek79
No there is not.
Answered by: rk cjpp
Date published: 2016-08-29

Hi, i am wanting to build a 67 Fastback from Dynacorn shell up. Do you have a catalogue/checklist of parts that i will need? Can i order these all through you in one shipment? What is the rough price range for this? Many thanks

Asked by: Flyingkiwi599
Please call toll free at 1-800-888-6473 and speak with a sales rep.
Answered by: rk cjpp
Date published: 2016-07-27

I need the entire upper portion of a 1967FB from the bottom of the windshield, top of the doors and bottom of the rear window. Already welded together in 1 piece. Is that available?

Asked by: M 60
Are the frame rails all set up for stock suspension or can it be ordered for a pro touring set up
Answered by: Chad b
Date published: 2016-06-25
  • 2016-12-05T08:12CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_31
  • loc_en_US, sid_67FB, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 137.44ms
  • QUESTIONS, PRODUCT

You Might Also Like