Dynacorn Outer Rocker Panel In Weld-Thru Primer Driver Side 1967-1970

Dynacorn: 3647MDWT
CJ's Low Price:
$162.99
1416787200 896
Earn 162 RPM Points What's this?
1416873600 1417392000
On Sale: Up to 30% Off Sale!
3647MDWT
3647MDWT 3647MDWT_1 3647MDWT_2 3647MDWT_3 3647MDWT_4 3647MDWT_5 3647MDWT_6 3647MDWT_7

Product Description

Dynacorn Driver Side Outer Rocker Panel In Weld-Thru Primer for all 1967-1970 Mustangs.

If you are restoring a 1967-1970 Mustang that has extensive structural damage, you will most likely need full outer rocker panels. Dynacorn's full-length outer rocker panel is 63" long and will provide a much more application specific fit over the basic 1965-1970 outer rocker panels. The high-quality outer rocker panel offers increased structural support due to the higher gauge of steel and features a weld-thru primer finish.

The rocker panel is located underneath the door and runs from the front of the rear wheelhouse to the rear of the front fender.

Advantages of Weld-Thru Primer:
- Reduces prep time when welding new parts to new parts that are both covered in the weld thru primer
- Reduced spatter
- Lower distortion of the panels
- Superior conductive properties that help minimize high heat zone problems
- Eliminates corrosion that would form between overlapped panels or multi-layered spot welds
- Helps when welding a new panel to old metal
- Lower resistance at the weld surface allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities
- Helps prevent resin build up between welds that can trap moisture in the old porous steel that leads to failure at the weld borders

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Good Quality
Good quality rocker. Has holes for trim mount. Fits well, but appears to be just slightly shorter than original. And slight means fractions of an inch
Mandy July 14, 2013
1 Results