Dynacorn Rear Window Molding Set Fastback 1971-1973

Dynacorn: M3584A
CJ's Low Price:
$181.99
1488240000 29567
Earn 181 RPM Points What's this?
Dynacorn Rear Window Molding Set Fastback 1971-1973
Dynacorn Rear Window Molding Set Fastback 1971-1973 Dynacorn Rear Window Molding Set Fastback 1971-1973 Dynacorn Rear Window Molding Set Fastback 1971-1973 Dynacorn Rear Window Molding Set Fastback 1971-1973
Dynacorn

Product Description

Dynacorn Rear Window Molding Set for 1971, 1972 and 1973 Fastback Mustangs.

This premium four-piece rear window molding set from Dynacorn features high-quality chrome-plated moldings to replace your worn or broken original moldings. Each piece has been measured and precision-cut by a laser to ensure the finish stays in perfect condition. Every part of this set is an OEM-style reproduction piece that will be a direct-fit to your Fastback's factory original moldings. Pick up some new molding clips to make install go faster and order your new set of rear moldings today from CJ's!

*Does not include window molding clips (F583) required for installation.

Restoring your Mustang can be a massive project. There are literally hundreds of parts that you may need to replace, and finding quality replacements can be a battle. While there are lots of choices out there, Dynacorn offers the widest selection in parts and some of the highest quality found anywhere. CJ Pony Parts offers more than 500 Dynacorn parts, allowing you to find practically anything you need. Browse our huge selection today and get to work restoring your classic beauty!

Order this Dynacorn M3584A Rear Window Molding Set for your classic 1971, 1972 or 1973 Fastback Mustang today from CJ Pony Parts!

Similar Mustang Parts

similar Mustang parts More Rear Window Moldings  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Dynacorn Rear Window Molding Set Fastback 1971-1973 is rated 1.0 out of 5 by 7.
Rated 1 out of 5 by from Corvex= useless. Ordered Dynacorn, got corvex. Way too soft, professional installer (vintage specialist) could not install them even with using a wooden paint stir to gently push on the edge. Underside just folded at the clip locations. Expensive garbage.
Date published: 2015-02-03
Rated 1 out of 5 by from Dynacorn rear window moulding Terrible quality far too soft impossible to fit by professional installer on my 72 sprint .
Date published: 2015-04-25
Rated 1 out of 5 by from Soft as butter. I have purchased this product along with some other moldings by Dynacorn (Corvex). They are exceptionally soft and incredibly hard to install with the factory clips as they tend to dent and bend on installation. I am going to purchase another set and glue them on instead as there doesn"t seem to be any other manufacturer that makes these.
Date published: 2015-10-30
Rated 1 out of 5 by from never again this is 3rd time buying these i have had 3 different window installers with many years of experience and every time this paper thin metal bends while installing, i called and was told i must not have installed it correctly. .a lot of money down the tubes now to look for yet another set
Date published: 2016-05-22
Rated 1 out of 5 by from poor quality I purchased a set of these moulding and ruined them trying to install them myself so i purchased another expensive set thinking i would have a professional to install them. Wrong they bent upon pressure from his thumb, a 300 dollar mistake on my part.
Date published: 2016-10-21
Rated 1 out of 5 by from rear window moldings 72 fastback Material so soft that just trying to push on with my thumb would bend the moulding COMPLETELY USELESS
Date published: 2016-05-13
Rated 1 out of 5 by from Terrible product I purchased a set of these and the metal was way too soft. Did not work and you can purchase any other product. Polish your old ones.
Date published: 2016-06-30
  • y_2017, m_2, d_27, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_RWM8, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 155.16ms
  • REVIEWS, PRODUCT

Product Questions

Does this moulding mount on the inside or outside

Asked by: RJ24
Outside.
Answered by: CJPP Dave
Date published: 2016-09-30
  • y_2017, m_2, d_26, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_RWM8, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 161.83ms
  • QUESTIONS, PRODUCT

You Might Also Like