Window Molding Clip Screw Type Set 1965

CJ's Part Number:
82% of 100


  • Screw On Style Molding Clips
  • Easy Installation
  • Sold As A Set
  • Fits 1965 Mustangs
MSRP $6.99
You save $0.35

Set of Screw Type Window Molding Clips for all 1965 Mustangs.

If it's time to bring your 1965 Mustang back to life with some new window molding trim, then you'll need to make sure you have the right number of molding clips to mount your new trim correctly!

Features and Benefits:
- Twelve Piece Set
- Properly Mounts your Trim
- Constructed from Premium Material

This Set of Screw Type Window Molding Clips will fit a variety of applications. This set comes with 12 pieces total. The amount of clips you'll need will depend on the specific application or job you're using them for. Make sure you look at the panels on your 1965 Mustang before you order these clips to make sure these are the ones you need to mount your new window molding trim.

This screw type molding clip will fit the following various applications with the correct number of clips needed for installation, including:

- 1965 Coupe front window: 22, rear window: 19
- 1965 Fastback front window: 22, rear window: 24

Order a Set of Screw Type Window Molding Clips for your 1965 Mustang from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We're here with window molding clips for your 1964 through 1973 Mustang. There are two main styles of clips: '64 through '65 Mustangs will use the screw ones style shown here. There'll be holes in the metal and use the screw to screw the clip to the metal itself. Starting in late '65, they switched to a pin design. The pin is actually already attached to the metal and they use the slip on style clip shown here.

Here in our project 50/30, you can see the two different styles. Our cowl is a reproduction and has the studs already mounted on it. Since our car is an earlier '65, the original clips would have been a screw type like that. To install the screw type, you simply line it up and screw the clip into place. Clip on style ones, same basic idea. Just put it over the clip. Just slide it on.

You want to make sure you look at the panels on your car before you order the clips because different years could have the panels replaced and it could be different. In case of our '65, we know the panels are original and it has the screw one type located here. Our cowl was replaced. The manufacturer of the cowl uses the clip on style ones. Our roof skin's also been replaced. You see this case, there are actually no clips whatsoever. You have to drill the holes and use the screw one style shown here.

Both style of clips and the screws are also in package of 12. Our website as well as our catalog both have detailed descriptions on how many clips you'll need for your Mustang.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account