Ford Racing Drum Brake Backing Plate 9" Kit

Ford Racing: M-2209-B
MSRP: $329.00
CJ's Low Price:
$309.99
1455062400 23408
Earn 309 RPM Points What's this?
Ford Racing Drum Brake Backing Plate 9" Kit
Ford Racing

Product Description

Ford Racing 9" Drum Brake Backing Plate Kit.

Drum Brake Backing Plate Specifications:
- 11" x 2.25" brakes for late model 9" axle housing
- 3.150" center pilot hole
- .381" attaching bolt holes
- 3.56" x 2" attaching bolt pattern

Kit Includes:
- New assembled backing plates (2) with brake shoes
- Wheel cylinder
- Self-adjuster
- Parking brake
- Springs

*Sold in pairs.

Similar Mustang Parts

similar Mustang parts More Brake Drums  

Installation Instructions

Mustang Installation

Product Reviews

Write a review
1

Product Questions

1

Will these fit 67 mustang rear end

Asked by: will33
They will not fit unless you changed from an 8 inch rear to a 9 inch rear.
Answered by: rk cjpp
Date published: 2015-12-30

Hello I'm after backing plates for 2anda half inch drums for nine inch diff?

Asked by: mlean
Unfortunately we do not offer that size at this time, these are for 2.25" drums.
Answered by: CJPP Dave
Date published: 2015-12-14

What kind of rear axle end housing fits this backing plate;  I know there are several types;  Big Ford Old style & Big Ford new style (old style uses 1/2"  holes, new style has 3/8 holes)

Asked by: BarryStein31D
These are designed to work with a Big For 9" New Style with 3/8" holes.
Answered by: CJPP Dave
Date published: 2015-10-15

I need to know if this will fit with my 9" rear end;  I am cutting down a non-mustang 9" Housing (it is not "necked down")  The diameter of the flange on the end is 4 5/8".  The Hole to hole length (4 bolt pattern) appears to be about 3 3/8"

Asked by: BarryStein31D
Dimensions are listed within the product description. Not sure if it would fit a non-Mustang rear end - we've never tried.
Answered by: CJ Pony Parts
Date published: 2015-08-07

will this kit fit a stock mustang 5.0 gt with 4 lug drums ?

Asked by: alecat
As long as you have a 9-inch axle housing and a 1964-1993 Mustang, you're good.
Answered by: CJ Pony Parts
Date published: 2015-08-06

I have a 1968 mustang  ,289 v8 , 8.8 rear, will this kit fit?

Asked by: Wooganowski 2
No, you need a 9-inch rear end.
Answered by: CJ Pony Parts
Date published: 2015-06-30

Hello, can this be mounted on a rear axle 9" coming from a Mercury monarch from 1973,mounted with disk

Asked by: Shelby Spirit
Unsure. We have only tested it on the fitments listed, so anything custom is untested with us. It could work, but it might not.
Answered by: CJ Pony Parts
Date published: 2015-03-04

will these brakes go on a 57 ford pass car housing/small bearing?

Asked by: mercmike
  • 2016-02-10T09:33CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_M2209B, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts

You Might Also Like