Show Quality Heater Hose with Red Stripe for all 1969 Mustangs.Have you been looking to replace the worn or damaged original heater hose in your 1969 Mustang? With this show quality direct replacement part made to precise OEM specifications, this upgraded refreshment is a breeze to install and keep your Mustang's appearance at high, show quality standards.
This great looking, Show Quality Heater Hose is shipped as one 8' length but must be cut into two separate segments prior to installation. This hose will act as the feed line and also the return line from the heater core in your 1969 Mustang. Make sure to measure accurately so you have the correct length of hose required for each task both to and from the heater core.
Using a 5/8" ribbed hose and featuring a correct, date coded red stripe (Autolite H9D11A), this eight foot long heater hose looks and acts the part of the original equipment it is replacing. This stripe is not hand stamped and therefore the ink is consistent, bold and legible throughout the length of the hose. This is exactly what you want to see on your 1969 Mustang's heater hose when you want to keep your restoration as close to factory original as possible!
*Hose measures 8' in length, does one car.
Product ReviewsWrite a review
Is this hose long enough to do a 1969 351 Windsor mustang w/AC? What is the date on this hose (decoded) Thx
If your 351C is OEM, it'll work. You'll end up cutting the hose in half to do the whole car.
Date published: 2015-02-10
You Might Also Like
CJ's Low Price:$31.99
By Bill Tumas: We’re here with the correct red stripe heater hose for your 1969 Mustang. The part comes with 8 feet that is 5/8th ribbed hose, that is the correct red stripe and all of the right markings, making it perfect for show-quality restorations for your 1969 Mustang. While only correct for the '69 Mustang, this high-quality 5/8th inch hose can be used on any other year Mustang as well.