Heater Hose Firewall Grommet Pair Mustang 1969-1970

CJ's Part Number:
HW852
Heater Hose Firewall Grommet Pair 1969-1970 is rated 4.5 out of 5 by 4.
  • y_2020, m_7, d_11, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HW852, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 142.04ms
  • REVIEWS, PRODUCT

Highlights

  • Rubber Construction
  • Seals Heater Core Lines
  • Direct Fit
  • Sold As A Pair
MSRP $18.99
$12.99
You save 32%

Pair of Heater Hose Firewall Grommets for 1969 and 1970 Mustangs.

This Pair of Heater Hose Firewall Grommets is made out of sturdy rubber. The grommets attach to the firewall and allow the heater hoses to pass through. You'll install them in the interior of your Mustang, and they will push out toward your engine bay. They are sold as a pair, so you'll get two of these grommets with your order.

Features and Benefits:
- Sturdy Rubber Construction
- Attaches to Firewall
- Installs Into Interior of Mustang
- Sold as a Pair

Vehicle Fitment:
- 1969-1970 Mustangs

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Mustang years:

Rated 3 out of 5 by from Nice part. Nice part but they do NOT fit a 69 Mustang. The 69 Mustang has flared firewall heater hose openings & they will not fit the openings. After doing some research they only fit a 1970 Mustang.
Date published: 2020-02-08
Rated 5 out of 5 by from nice seal I much needed part for a clean look. Fit well and look nice. A bit over priced for what they are, but options are limited.
Date published: 2015-08-14
Rated 5 out of 5 by from Perfect Perfect fit, perfect look - installed in the firewall with no problem - hoses run through them with no problems.
Date published: 2017-01-05
Rated 5 out of 5 by from excellent, just what I needed Hard to find aftermarket part. Would recommend.......................
Date published: 2015-09-19
  • y_2020, m_7, d_11, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HW852, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5ms
  • REVIEWS, PRODUCT

will these also work in '66 mustang with 5/8" hose?

Asked by: enigma064
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2017-02-02
  • y_2020, m_7, d_11, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_HW852, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 128.71ms
  • QUESTIONS, PRODUCT