Mustang Glove Box Liner (1967-1968) Installation Instructions

• 
• 
• 
• 

1967-1968 Mustang Glove Box Liner

This Glove Box Liner will fit 1967-1968 Mustangs.

After years of use, the glove box liner on your 1967-1968 Mustang can become stained, cracked or damaged, so you may need to replace it with this brand new replacement Glove Box Liner. It looks exactly like the original and installs simply.

This Install Also Applies To:

• Mustang Glove Box Liner 1965-1966
• Mustang Glove Box Liner With Owner's Card Clip 1966
• Mustang Glove Box Liner With Air Cond 1971-1973
• Mustang Glove Box Liner Without Air Cond 1971-1973
• Mustang Glove Box Liner With Air Conditioning 69/70
• Mustang Glove Box Liner Without Air Conditioning 69/70
• Mustang Glove Box Liner Flocked Black 1964-1966
• Mustang Glove Box Liner Flocked Gray 1964-1966
• Mustang 65 Glove Box Liner (7) Hardware Only 1965
• Mustang 66 Glove Box Liner (7) Hardware Only 1966
• Mustang 67-8 Glove Box Liner (4) Hardware Only 1967-1968
• Mustang 69 Glove Box Liner (5) Hardware Only 1969
• Mustang 70 Glove Box Liner (5) Hardware Only 1970
• Mustang 71-73 Glove Box Liner (5) Hardware Only 1971-1973
• Mustang Glove Box Liner Screw Set 1965-1966

Tools Required:

• Phillips Head Screw Driver

Install Difficulty:

• 
• Easy Project

1. Remove the original glove box liner. There are two Phillips head screws across the top and two at the bottom that attach it to the Mustang glove box.

2. Insert the new glove box liner and attach it with the same Mustang glove box liner hardware.

3. Enjoy your new Mustang glove box liner.