Scott Drake Fan Shroud Plastic 3-1/2" Wide 260/289 1965-1966

Scott Drake: C3DZ-8146-3

Regular Price: $93.99

Special Price: $84.59

1435881600 14801
Earn 93 RPM Points What's this?
1435795200 1436140800
On Sale: Up to 30% Off Sale!
Scott Drake Fan Shroud Plastic 3-1/2" Wide 260/289 1965-1966
Scott Drake Fan Shroud Plastic 3-1/2" Wide 260/289 1965-1966 Play Scott Drake Fan Shroud Plastic 3-1/2" Wide 260/289 1965-1966 Video 1 Play Scott Drake Fan Shroud Plastic 3-1/2" Wide 260/289 1965-1966 Video 2
Scott Drake

Product Description

Scott Drake 3-1/2" Wide Plastic Fan Shroud for 1965-1966 260/289 Mustangs.

This new & improved fan shroud from Scott Drake is for the 65-66 8-cylinder Mustangs and is efficient in drawing in cool air through the radiator at low speeds and idle, which is when most overheating occurs. This shroud is 3 1/2" wide.

Not only does this larger shroud greatly enhance cooling capabilities, it also offers more protection from the fan blades. Made from ABS plastic.

*65-66 6-cylinder Mustangs can use this shroud with minor trimming.
*Fan shroud brackets sold separately.

Similar Mustang Parts

similar Mustang parts More Heating & Cooling  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
1
Scott Drake Fan Shroud Plastic 3-1/2" Wide 260/289 1965-1966 is rated 4.6667 out of 5 by 3.
Rated 5 out of 5 by from Perfect fit Bought this for my 65 mustang. Had to modify a little because of alternator but fits perfectly. Stopped the engine from running hot. Looks great
Date published: 2015-06-04
Rated 5 out of 5 by from Great fit I'm very happy with this shroud. It was a snap to install and it has done a great job keeping my 289 cool.
Date published: 2015-01-08
Rated 4 out of 5 by from Works, but needs work This shroud does the job, but it could be better designed and marketed. First, it comes with no instructions, and requires a special set of mounting brackets. They also come with no instructions, so you have to figure it out yourself. Although the radiator is currently held in place with four symmetrically square holes, two on each side, the shroud holes are not symmetrical. They are offset upwards on the passenger side and downwards on the driver side. The brackets are what do the offset. The offset is there I guess to allow you to get a socket wrench in to attach the underlying radiator-to-frame bolts. But the brackets are thin, flexible metal and bend/distort easy when you attach the fan shroud, which is of flexible black ABS plastic. Odds are that when you finally get the shroud in place, the blades will be touching at some spot, as the bracket alignment and shroud flexibility guarantee some misalignment and out-of-roundness. The four holes on the shroud which hold the shroud to the brackets are elongated vertically, but not enough. In my case, I had to get a drill bit and elongate them even more vertically to allow enough up and down movement of the shroud to keep it away from the fan blades. Fortunately it is soft plastic and reams out easily. Also, even for my three row radiator, the three-row brackets are a little too long and initially placed the shroud 1/4 to 1/8 inch away from the radiator, shaking like crazy. You may need to bend the brackets to reduce the space between the two ears to bring the shroud up against the radiator. A better design would have been to keep the shroud mounting holes in square symmetrical alignment with the radiator mounting holes/bolts and use a long common bolt to hold both the radiator and the shroud in rigid alignment. If I were Scott Drake, I would redesign this to mount better and easier. It would not take much effort. I would also include instructions and/or a video to show how to make adjustments.
Date published: 2015-06-27
  • 2015-07-03T10:04CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_FANS11, PRD, sort_relevancy
  • clientName_cjponyparts

Product Questions

1

Which is the top ...nothing marked and they are different.

Asked by: Vinny50
It's pictured top up.
Answered by: CJ Pony Parts
Date published: 2015-06-30

I need to know the full dimensions height and width of it 

Asked by: Mike messinger
It's 18x18.5x3.5
Answered by: CJ Pony Parts
Date published: 2015-02-06

I was wondering the dimensions of the shroud I have purchased shrouds and don't fit my factory radiator I need to dimensions to see if it fits my radiator thank you

Asked by: Mike messinger
This shroud is 3 1/2" wide.
Answered by: CJPP Staff
Date published: 2015-02-05

can you please tell me what are the correct brackets for this shroud its the 3 1/2 inch for a 65 regards

Asked by: beery

Hello friends. What diameter fan will fit inside this shroud? Thanks for your help.

Asked by: CrazyChris

what are the dimensions of this shroud will an 18 inch flex fan fit in it and will it mount on aftermarket aluminum radiator

Asked by: Anonymous
  • 2015-07-03T11:16CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_FANS11, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts

You Might Also Like

Product Video

Scott Drake Fan Shroud Plastic 3-1/2" Wide 260/289 1965-1966 Video Transcript
By Bill Tumas: We’re here with a high performance 3 1/2-inch fan shroud for your 1964 through 1966 small block Mustang from Scott Drake. This 3 1/2-inch ABS fan shroud is 3 1/2 inches deep, which does a great job of drawing air in at idle, which is when your Mustang has its biggest problems with overheating. It's designed to fit your '64 through '66 small block Mustang, but will also fit the six cylinder with minor trimming. This 3 1/2-inch fan shroud is a great way to aid minor cooling issues in your '64 through '66 small block Mustang.