SSBC Standard Front Disc Brake Conversion Kit for 1967-1969 Mustangs with Power Brakes and a Manual Transmission.Caliper Specs:
Type of Caliper - Standard
Number of Pistons - 4
Piston Size - 43mm
Constructed From -Cast Iron
Diameter - 11.25"
Thickness - 0.8125"
Venting -Uni Directional (straight vane)
Standard Finish - Standard
Bolt Pattern - 5 x 4.5"
-New Brake Pedal
-Pair of Rotors
-Pair of Calipers
-Front Brake Pads
-Dual Bwl Master Cylinder & 7" Dual Diaphragm Booster
-2 Brake Hoses
-All Brackets, Bearings, Seals & Hardware
*Bolts to All 1967 Spindles and only Drum Brake Spindles from 1968-1969 cars.
*NOTE: Most 6 cylinder cars have a 4 x 4.5" boltpattern - this kit will convert the front only to a 5 x 4.5" bolt pattern.
Similar Mustang PartsMore Restomod Brakes
Product ReviewsWrite a review
Is it imperative to fit dustshield to 1967 mustang front disc brakes thanks Rob
I have mustang coupe 68 v8 302, does this brake systmem is need a lot of modification or just plug n play? Does it support 16 inch or more ring wheels?
I have a 67 mustang with 289 V8 and would like to install front power disc brakes. Will these fit the style steel wheels 14 x 7?
I have 1967 Musting convertable 302 auto trans with manual drum brakes. I like to convert frt brakes to disk and add a pwr brake system Pls recommend a kit? Do the rims need to be changes? What back depth do the rims need to accomadate disk brakes?
Do people generally just convert the front brakes, and leave the rear drum brakes?
You Might Also Like