SSBC Standard Rear Disc Brake Conversion Kit for all 1987-1992 Mustangs.Caliper Specs:
Type of Caliper - Standard
Number of Pistons - 1
Piston Size - 45mm
Constructed From - Cast Iron
Standard Finish - Bare Iron
Optional Finishes - Black or Red Powder Coat
Diameter - 10.25"
Thickness - 0.949"
Venting - Uni Directional (straight vane)
Standard Finish - Standard Rotor
Bolt Pattern - 4x4.25"
- Master Cylinder
- Pair of Rotors
- Pair of Calipers
- High Performance Brake Pads
- Brake Cables
- Hard Lines
- Hardware & Instructions
*Requires 14x7" or larger wheels.
Product ReviewsWrite a review
SSBC Standard Rear Disc Brake Conversion Kit 4-Lug 1987-1992 is rated out of 5 by 1.
Rated 1 out of 5 by Fastway from Bad fit !!! Be careful when ordering this product the roters in the kit will NOT fit the original axles you will need to machine your axles in order to fit the disc's that come in the kit. And good luck finding a machine shop thats willing to do that!!
Date published: 2016-07-05
how much are the additional parts needed for the emergency brake setup once converted. thanks.
You shouldn't need any additional parts.
Date published: 2016-07-14
I have a Factory Five 427 COBRA with a 4 LUG 1991 Mustang 5.0L HO rear end. Is it necessary to replace the Brake master cylinder unit?? it presently has the Mustang 5.0L HO parts from a doner car.
From the sounds of it, you may be fine with the master cylinder that you currently have. But we would recommend using the master cylinder that comes in this kit.
Date published: 2016-03-11
Does this kit include a parking brake assembly?
This kit does not come with the handle or front cable, the calipers have the parking brake mechanism built into them.
Date published: 2015-10-13
So will this kit be compatible with the standard pony wheels that come stock with a 1988 mustang gt
As long as they are 14x7 or larger, you're good.
Date published: 2015-07-22
On the picture it shows 2 types of rotors. When I choose the black power coat ones it shows the standard rotors, but I want the rotors with the slots and holes. How do I specify I a want the the rotors with the holes and slots?
Unfortunately, this kit isn't available with slotted/drilled rotors. The picture is incorrect and we're going to be working with our photography department to get it fixed. Thanks for bringing it to our attention.
Date published: 2015-05-19
what about the proportional valve, will that need to be replace for a 1994 proportional valve for disk brakes. I have a 1992 proportional valve that leaks and no luck finding one that fits a 5.0 mustang with rear drums brakes.
We have several available. The SSBC version is CJ part # A0707-V and fits all Mustangs from 1964.5-2014.
Date published: 2015-04-14
Looking at the parts listed in the Kit Features and looking at the pics...there is no master cylinder in any of the pics. Is this just an oversight? What part# master cylinder should have been included?
A master cylinder is included. It just was left out of the photo for some reason.
Date published: 2015-03-30
I have a 83 hatch back gt with a 89 8.8. Which kit do I want? The one for 79 to 86 or 87 to 92?
You Might Also Like
CJ's Low Price:$129.99
CJ's Low Price:$129.99