Supreme Front Steering and Suspension Kit 1971-1973

CJ's Part Number: SUSK11
MSRP: $914.64
CJ's Low Price:
1477353600 31591
Earn 799 RPM Points What's this?
Supreme Front Steering and Suspension Kit 1971-1973
Supreme Front Steering and Suspension Kit 1971-1973 Play Supreme Front Steering and Suspension Kit 1971-1973 Video 1

Product Description

Supreme Front Steering and Suspension Kit for 1971-1973 Mustangs.

We offer the most complete front steering and suspension kit for you Mustang. Replace all those worn out rusty parts with this kit featuring direct replacement parts. Your Mustang will feel like a brand new car after the installation of our kit.

Kit Includes:
- Two upper control arms
- Two lower control arms
- Two shock tower bumpers
- Two coil spring saddles
- Two coil spring insulators
- Two coil springs
- Front sway bar with bushings
- Two front sway bar end links
- Two inner tie rods
- Two outer tie rods
- Two tie rod sleeves
- Idler arm
- Strut rod bushing kit

Similar Mustang Parts

similar Mustang parts More Suspension Kits  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 97.44ms
  • bvseo-msg: HTTP status code of 403 was returned;

Product Questions

Is this kit ok for power steering?

Asked by: Mercury
Yes it is.
Answered by: rk cjpp
Date published: 2016-09-22

Front sway bar is it 1"

Asked by: dale5683
It is a 1-inch sway bar.
Answered by: CJ Pony Parts
Date published: 2015-09-29

I am looking at the Supreme Front Suspension Steering Kit-SUSK11. Can any of the parts in the kit be upgraded to a higher priced part, or for a different type ? example: spring insulators polyurathane, spring perches w/poly, or polyurathane bushings.

Asked by: DooRunRun
Not within the kit - you would need to order the parts you want individually to get different/upgraded versions.
Answered by: CJ Pony Parts
Date published: 2015-08-07

Hello, i am going to do an engine change to 460cui to my 71 convertible. Are there matching springs available within this front suspension kit? What spring rate would you advise for a BigBlock? Greetings from Germany, Marcus

Asked by: Marcus1966
Springs are included with this kit.
Answered by: CJ Pony Parts
Date published: 2015-07-14

Can you get this kit but with 1" lowered springs 

Asked by: Ducati

What size is the sway bar included in this kit?

Asked by: KUTIM
  • 2016-10-25T08:06CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_SUSK11, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 11.22ms

You Might Also Like

Product Video

Supreme Front Steering and Suspension Kit 1971-1973 Video Transcript
By Bill Tumas: We're here with our Supreme Suspension and Steering Kit for '65 thorough '66 V8 Mustangs with manual steering. We offer similar kits for all '65 through '73 Mustangs, covering six-cylinder small block, big block, as well as manual and power steering options. Our kits include everything to replace the wear parts in your steering and suspension, including coil springs, coil spring insulators, upper control arms, inner and outer tie rods, lower control arms, coil spring saddles, idler arm, strut rod bushing kit, shock tower bumpers, and a one inch sway bar kit, complete with bushings and end links.

This '65 Mustang being restored by CJ Pony Service has our steering and suspension kit already installed. We put it up on the rotisserie to give you a better idea of where the components go.

The coil spring insulator goes between the top of your coil spring and the top of the shock tower. The saddle attaches the spring to your upper control arm. The upper is attached to the chassis and then attached to your lower control arm via your spindle. Your strut rod is going to go from your lower control arm out to your strut rod bracket with the bushing mounted on the end piece here. Your sway bar attaches to your lower control arm and then also attaches to your chassis.

The kit includes greasable outer and inner tie rod ends, as well as a new idler arm assembly. Our steering and suspension kit is a great way freshen your warn out suspension. With the exception of the spindle, the strut rod, this tie rod end sleeve, your center link, and your pitman arm, everything else is included. With the exception of the spindle, all of the other pieces are available separately if needed.