Baer Brakes Pro+ 13” Rear Brake System with Parking Brake 4

Maximize your 1993 Mustang’s braking performance with this Rear Brake System by Baer Brakes (4262294R). Designed to deliver superior stopping power, this kit combines advanced engineering and high-quality materials to transform your Mustang. The heart of this system is its 6P 6-piston calipers, tailor-made for rear applications. These calipers feature small and staggered pistons to optimize brake bias and minimize pad taper for exceptional braking performance. Reinforced with six 3/8” cross bolts, the calipers are built for stability and endurance, capable of handling the rigorous demands of street and track driving. Finished in bold red, the calipers not only improve your braking efficiency but add a striking visual element to your vehicle's overall aesthetics. The calipers feature dust and weather seals to ensure your Mustang's braking performance remains top-notch in any condition!

Features and Benefits:
- 13” x 1.10” rotor design
- 6P 6-piston caliper
- Designed for rear applications 
- Smaller and staggered pistons for proper brake bias and minimal pad taper
- 2-piece rotor design 
- 6061 T-6 billet aluminum hat that is bolted to the rotor friction ring
- Slotted and drilled design
- Zinc-plated rotor
- Dust and weather seals
- Pre-assembled rotors 
- Unique backing plate serves as a caliper mount and houses a 1-piece park brake shoe assembly
- Includes steel braided hoses, brake pads, and more
- Unique design allows the calipers to float with the factory c-clip axles
- Self-centering brackets allow the caliper to float with the rotor/axle 
- Red finish
- (6) 3/8” cross bolts

These 13” x 1.10” two-piece rotors feature a 6061 T-6 billet aluminum hat bolted to the rotor friction ring, allowing for reduced unsprung mass and improved cooling. The slotted and drilled design further aids in dissipating heat and preventing brake fade. Each rotor is zinc-plated, offering robust protection against corrosion. The unique backing plate acts as a caliper mount and houses a 1-piece park brake shoe assembly, seamlessly integrating with your Mustang's factory setup. The system's self-centering brackets and design allow the calipers to float with the factory c-clip axles eliminating piston knockback while enhancing your driving experience with consistent braking power. As a bonus, this system includes stainless steel braided hoses, high-quality brake pads, rotor and hat assemblies, mounting brackets, park brake assembly with cables, system hardware, abutments, and noise suppression springs! 

Vehicle Fitment:
- 1993 Ford Mustangs
*Models with OE 8.8” rear end and 4-lug axles.
*Designed for Ford 8.8 c-clip rear with 2.5” axle standoff.
*Does not fit 1993 Cobra.

Additional Notes:
- The minimum wheel size is 17”.
- This system has a 4x4.25” bolt circle.
- A master cylinder upgrade is recommended.
- The caliper can accept 13” and 14” rotors.
- The system uses correct banjo-style fittings.
- Baer does not use any pipe thread.