CJ Classic Trucks Main Tank Fuel Sending Unit 3/8" Bronco 1966-1976
Highlights
- OEM-Style Reproduction
- Includes Lock-Ring And Seal
- Comes With O-Ring And Strainer
- Stock 3/8" Size Outlet Tube
CJ Classic Trucks 3/8" Main Tank Fuel Sending Unit for 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, and 1976 Broncos.
Is the fuel gauge in your classic Bronco not working properly? This is definitely not the kind of part you want to let go. While it may seem difficult to locate the correct part you need for your Bronco, you don't need to search through salvage yards for the Bronco parts you need any longer! CJ Classic Trucks has the parts you need to complete your Bronco project.
Includes:
- Lock ring
- Seal
- O-Ring
- Strainer
*This is the OE style Fuel Tank Sending unit for 1970-1976 Broncos, but it will fit 1966-1976 Broncos.
*This fuel tank sending unit should read: Full - 10 ohms, Empty - 80 ohms (+ or - 10 ohms).
This is a premium quality 3/8" fuel tank sending unit. If your main (rear) fuel tank sending unit is not working properly you should replace it immediately with this unit. The fuel gauge will most likely not function properly when using the main tank if your sending unit is not in good working order. An added bonus is that this part comes with a lock ring, seal, o-ring and strainer for your convenience.
California Residents: Proposition 65 Warning
Installation Videos
Video Transcript
This is going to be a replacement sending unit for the factory sending unit found in the main tank of your 1966 through 1976 Bronco. This is going to be correct for the '70 through '76, but will fit all years. It's going to have the correct style brass float, the filter, and a 3A fitting. It's going to include a locking ring as well as the gasket for installation. This sending unit will read approximately 10 ohms full and 80 ohms empty, plus or minus 10 ohms.
Matching sending unit for the auxiliary fuel tank on your classic Bronco is also available at CJPonyParts.com.
