CJ Classics Fuel Tank Conversion Kit 22 Gallon Premium Mustang 1967-1968

CJ's Part Number:
XFTK16
Rating:
98% of 100
MSRP $295.07
$219.99
You save 25%

CJ Classics Premium 22-Gallon Fuel Tank Conversion Kit for all 1967-1968 Mustangs.

This Premium 22-Gallon Fuel Tank Conversion Kit from CJ Classics comes with everything you need to upgrade from the 16-gallon fuel tank in your 1967 or 1968 Mustang, to the larger 22-gallon fuel tank that is used in 1970 Mustangs. With a Premium 22-Gallon Fuel Tank Conversion Kit, your Mustang will benefit from 6 extra gallons of fuel, which is almost 40% more compared to the factory 16-gallon fuel tank. Now you will be able to avoid those frequent stops at the gas station and finally be able to enjoy longer road trips in your 1967 or 1968 Mustang with peace of mind.

This Premium 22-Gallon Fuel Tank Conversion Kit makes the switch to a larger fuel tank relatively painless and is a smart upgrade for anyone looking to increase fuel capacity. So, if you are running a 4-barrel carburetor or any other type of performance modifications, this Premium 22-Gallon Fuel Tank Conversion Kit is perfect for your 1967 or 1968 Mustang!

Fuel Tank Conversion Kit Includes:
- Premium 22-Gallon Fuel Tank
- Scott Drake Fuel Tank Sending Unit
- Custom Fuel Filler Pipe
- Fuel Tank Filler Hose
- AMK Products Fuel Tank Mounting Hardware Kit
- Fuel Filler Pipe to Body Gasket
- Fuel Tank Filler Screws

The focal point of this conversion kit is the Premium 22-Gallon Fuel Tank. This North American made fuel tank is a direct replacement for all 1970 Mustangs, but will fit in any 1967 or 1968 Mustang using the factory mounting locations, without any modifications. The tank has been pressure tested twice to ensure a quality unit. Constructed using original dimensions, the premium tank measures 32-5/8" x 24-1/2" x 9-3/4", with the correct 22-gallon capacity. It comes with a special coating that prevents rust and corrosion. A drain plug is included for easy drainage.

This conversion kit comes with a premium Fuel Tank Sending Unit that is specific for the 22-gallon fuel tank allowing for accurate fuel level gauge operation. The new Fuel Tank Sending Unit features a 3/8" outlet tube and includes a plastic float, O-ring gasket, resistor, mounting plate and filter.

Your 1967 or 1968 Mustang's original filler neck will no longer work with the new 22-gallon tank and must be replaced. That is why this conversion kit includes a custom Fuel Filler Pipe, designed to be a direct bolt-on replacement that lines up perfectly with the neck on the 1970 Mustang's 22-gallon fuel tank. The brand new, high-quality Fuel Filler Pipe is made from thicker steel compared to the original filler pipe found in the 1967 and 1968 Mustangs. It features the correct notch for the gas cap seal to let air in and is designed so that the gas cap fits tight.

The best part about this conversion kit is the fact that everything bolts up to the factory locations using original hardware. A Fuel Tank Mounting Hardware Kit from AMK Products is included, which comes with all the necessary mounting hardware required to drop in the new fuel tank and secure it.

Please Note: Molded trunk mats will no longer fit properly when a 22-Gallon Fuel Tank Conversion Kit is used because the larger fuel tank will eliminate the hole that the molded trunk mats fit into.

California Residents: Proposition 65 Warning

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.