CJ Classics Leaf Spring Kit 1967-1968

CJ's Part Number:
LSK2
CJ Classics Leaf Spring Kit 1967-1968 is rated 4.5 out of 5 by 6.
  • y_2019, m_10, d_19, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_LSK2, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 145.9ms
  • REVIEWS, PRODUCT
MSRP $260.95
$218.99
You save 16%

CJ Classics Leaf Spring Kit for 1967-1968 Mustangs.

If the rear end of your 1967-1968 Mustang is sitting lower than the rest of your classic car, than it may finally be time to overhaul that original suspension system. Go ahead and order this complete CJ Classics Leaf Spring Kit from CJ Classics now!

This high-quality kit will fully replace your pony's original leaf springs with high-quality 4-leaf standard reproduction springs! You'll get new springs, spring bolt, U bolts and spring shackles--pretty much everything you'll need to complete the project. You'll be able to restore your Mustang's original ride and handling with this kit, so what else do you need to know? Place your order now with CJ's!

Leaf Spring Kit includes:
- 2 Leaf springs
- 2 Leaf spring bolts
- 4 U bolts
- 2 Leaf spring shackles

CJ Pony Parts is proud to offer high-quality, dependable restoration parts and pieces for your classic Mustang from superior brands like CJ Classics! Offering OEM-style restoration and direct-fit replacement parts, CJ Classics carries practically anything you might need to complete your next pony project. Don’t wait and place your order with CJ’s today!

Hurry up and purchase this brand-new replacement CJ Classics Leaf Spring Kit for your vintage 1967-1968 Mustang now from CJ Pony Parts!

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Bringing new life to an old friend!! This Leaf Spring kit is a must have for any one who is restoring their mustang or just wanting to breathe new life into that sagging rear end. An easy installation for any novice which means more money in your pocket to by more CJ Pony Parts. The install can be done in a couple hours max with the use of a ratchet and socket set, large screwdriver, hammer and a floor jack. So prepare your pride and joy for an easy weekend project and be ready for that next car show.
Date published: 2015-01-07
Rated 4 out of 5 by from Good leaf springs, ubolts and front bolt not used. My 68 had air shocks when I purchased it and when I switched to KYBs the car bottomed out. Figured it was the rear leaf springs. These springs where easy to install and did the trick. My car is level and no more bottoming out. These are just what I needed and would recommend them. Why not 5 stars? The ubolts stink and the front "long" bolt was too long. The ubolts don't fit properly so after trying to bend and pry them on, some of the threads were ruined. I ended up using my old ubolts (which went back on in about a second) and my old front mounting bolts. This kit gets priced by the sum of the parts once you order it so this was about $25 in wasted parts. If you need new springs, buy them and the shackles as stand alone and reuse your other hardware if you can.
Date published: 2016-03-30
Rated 4 out of 5 by from Stock 68 Coupe Overall this is a good kit for the money. The springs and the shackle kits are exactly like the originals, however the shackles and front bolts are not so great. The bolt kit, part number LSB1P, won't work on my car. The bolt needs to have about 5/8 of an inch more thread to be able to tighten the bolt. The description for the kit says it's an exact replacement... it's not. I had to go out and buy some, so these were a waste of $10. The U bolts needed to be bent a fair bit to fit the bracket spacing and the threads go nearly up to the bend which really chews up the paint on the axle. The original U bolts don't even have half the amount of thread as these. The road test went fine. The back end feels tighter, and the question everyone wants the answer to... it raised the back end 2 full inches from the old worn out factory springs.
Date published: 2015-01-11
Rated 5 out of 5 by from Just What I Needed These were fairly easy to install (I had a lot of help from a friend). They raised the rear of my 1968 Mustang to its original height. We also installed a set of "Monroe TS58539 Sensa-Trac Load Adjusting Shocks" with these leaf springs. The ride and drive is ten times better than it was....I do recommend these springs....<><
Date published: 2015-11-01
Rated 4 out of 5 by from A Good Kit The springs fitted perfectly, the only problem encountered was that the bolts supplied for the fixed end of each spring were overly long and had insufficient thread length all of which required two spacers to be fitted underneath the nuts..
Date published: 2015-05-09
Rated 5 out of 5 by from Works great Easy to install with required tools. Everything fit
Date published: 2018-06-19
  • y_2019, m_10, d_19, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_LSK2, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.61ms
  • REVIEWS, PRODUCT

Has the hardware kit on the '67 leaf spring kit been upgraded in the past two years? I see lots of complaints about shackle bolts too short and u-bolts threaded way too much?

Asked by: jwhit791
Just purchased in 2019 and the hardware (front spring bolt) doesn't fit the 1968.
Answered by: Res731
Date published: 2019-07-04

Will this fit a 1968 small block cougar&nbsp;

Asked by: Chevykilla69
Yes they will.
Answered by: rk cjpp
Date published: 2018-12-31

Does this spring have a 1.5&quot; lift?

Asked by: MannythePlumber
No, it would be stock ride height.
Answered by: rk cjpp
Date published: 2017-11-28

What are these rated? I have a 200 cu in engine and need 85&nbsp;

Asked by: Jen Lind
The four leaf springs are for the 6 cylinder and small Windsors.&nbsp;
Answered by: Tucson Steve
Date published: 2018-07-24

all bushings included

Asked by: fastback67
All the ones that are shown.
Answered by: CJPP Dave
Date published: 2015-11-03

Does this kit come with the rubber bushings? If not, what part is needed?

Asked by: Goet
Yes it does.
Answered by: CJPP Dave
Date published: 2018-07-24

Which spring kit should I use to lift the rear end. I hear that there is a set that lifts 1.5&quot; ?

Asked by: Rp68
We do not offer that type of spring, we sell stock height and lowering springs.
Answered by: rk cjpp
Date published: 2018-07-24
  • y_2019, m_10, d_20, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_LSK2, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 138.23ms
  • QUESTIONS, PRODUCT