Classic Performance Products Front Disc Brake And OE Style 2-1/2" Drop Spindle Upgrade Kit For 6x5.5 Lug Pattern Chevrolet C10 1963-1970

You may have noticed that your classic Chevy C10 truck's brakes don't work like they used to and aren't holding up with modern cars on the road today. If this is the case, CJ Pony Parts recommends this Front Disc Brake and OE Style 2.5" Drop Spindle Upgrade Kit from Classic Performance Products. With everything you need to lower the front of your pickup and enhance your braking power, this kit will greatly enhance your 1963-1970 C10 and get you back on the road in no time.

Features and Benefits:
- OE Drop Spindle Upgrade
- Reatains Factory Offset
- Factory Backspacing
- Lowers Front End with 2-1/2" Drop Spindles
- Converts Front OE Drum Brakes to Disc
- Standard 12" Vented Rotors

This brake kit (P/N: 6370SWBK-6D) bolts into place and has been designed to accept stock ball joints and tie rod ends (included with the kit) for a simple and quick installation. It retains factory offset and backspacing while dropping the front of your truck 2.5-inches with the included drop spindles. Classic Performance Products also packs this kit with calipers, bearings, seals, spindle nuts, dust caps, banjo bolts, tie rod adjustable sleeves and even dust shields to help your C10 stop faster. The upgrade uses 12" standard vented rotors for both sides that will enhance your braking capacity and look good on your undercarriage. For your convenience, the kit also comes with all the necessary hardware.

Includes:
- 2.5" Drop Spindles
- 12" Standard Vented Rotors
- Calipers
- Dust Shields
- Bearings, Seals and Spindle Nuts
- Dust Caps and Banjo Bolts
- Standard Brake Hoses
- Upper and Lower Ball Joints
- Inner and Outer Tie Rod Ends
- Tie Rod Adjustable Sleeves

Please Note: This kit may not work with factory drum brake wheels.