Corsa Cold Air Intake Kit GT 2015-2017

Corsa: 419950
MSRP: $453.32
CJ's Low Price:
1508457600 64745
Earn 339 RPM Points What's this?
Corsa Cold Air Intake Kit GT 2015-2017
Corsa Cold Air Intake Kit GT 2015-2017 Corsa Cold Air Intake Kit GT 2015-2017 Play Corsa Cold Air Intake Kit GT 2015-2017 Video 1

Product Description

Corsa Cold Air Intake Kit for 2015, 2016 and 2017 GT Mustangs.

Get rid of your 2015-2017 GT Mustang’s restrictive factory intake and let it breathe. Replace it with this all new Cold Air Intake Kit from Corsa! With high quality manufacturing, Corsa has designed this cold air intake for the best increase in airflow to maximize your Mustangs engine performance.

Corsa Cold Air Intake Kit 419950 Features and Benefits:
- Improved engine performance
- Enclosure keeps hot air out
- Increased air flow with sculpted air ducts
- Large diameter and unique smooth bends increase Horsepower
- Long life filter is washable and reusable
- Flexibility, strength and thermal stability provided by silicone connectors
- Durable stainless steel clamps
- Included instructions and hardware
- Made in the USA

Tech Tip: For 2017 GT Mustangs manufactured after 9/16, vacuum for the CMCV’s (Charge Motion Control Valves) is no longer picked up from the intake tube. This will require a plug to be used with the unused port/fitting on your new cold air intake tube when installing on all 2017 GT Mustangs built after 9/16 only. The production date on the vehicle (month/year) is located on decal in driver side door jamb.

Factory intake systems can be very restrictive, limiting your 2015-2017 GT Mustangs performance potential. Replacing the factory intake with an aftermarket cold air intake improves engine responsiveness and performance. Corsa has designed their Cold Air Intake Kit with multiple ways of increasing performance of the S550. The air filter box has been designed to minimize the amount of hot air from the engine bay reaching the intake to keep the engine running cool. Airflow has been increased with sculpted air ducts that have a large diameter with smooth bends to increase horsepower. A tune is not required to achieve the increased performance provided by this cold air intake kit.

The long life filter included with the intake kit can be easily cleaned and reused, saving you the cost of replacing filters. Silicone connectors give the intake system some flexibility, yet still retain strength and thermal stability. Marine grade stainless steel clamps ensure a tight connection of the cold air intake system for optimal operation. Installation of Corsa’s Cold Air Intake Kit is simple with the included instructions and necessary hardware.

*This intake is not CARB legal.

When you get your new Mustang, one of the first modifications that many owners tackle is a cold air intake. Typically, factory intakes are pretty restrictive, which means the engine isn't getting the amount of cool air it needs to run most efficiently. With one of the new 2015-2017 Mustang Cold Air Intakes from CJ Pony Parts, you're going to up the efficiency, which will help increase the performance from your new Mustang. Order yours today!

Order this Corsa 419950 Cold Air Intake Kit for your 2015, 2016 or 2017 GT Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More GT Cold Air Kits  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Corsa Cold Air Intake Kit GT 2015-2017 is rated 4.3 out of 5 by 4.
Rated 4 out of 5 by from Pretty Good CAI I puzzled exchanging the stock air box for an aftermarket air box with this style CAI, but decided to go w/ the look & simplicity of the Corsa CAI. CJP shipped it really fast. This is an easy project. The main challenge is getting the Corsa air box to fit over the stock air intake. Corsa recommends using a flat head screw driver for leverage. I went with a 2" chisel with success first time. The mount for the air sensor also should be relocated an inch, because you have to really stretch the wire harness to plug it back in. Otherwise, an easy, feel-good product/project. I also suggest removing the sound tube, another example of Ford over-thinking.
Date published: 2016-09-03
Rated 4 out of 5 by from Great Performance! This product has incredible throttle feedback. I was highly surprised of how throaty the exsuast note sounds with this installed. I would have given five stars but the installation paperwork needs to be revised. It needs to state that you have to put a screwdriver through the opening of the Corsa air box in order for the corsa to fit over the existing air inlet. That took forever to get it to finally go on. In addition the MAF sensor wires have to pulled out of their existing location and reworked to fit them into the Corsa. Other than that the install took about an 1 hour 40 minutes and the car runs like a scalded ape.
Date published: 2017-03-16
Rated 4 out of 5 by from a look that fits the car this is the best design that I have found. the internals of the piping is smooth and it is well manufactured product. the connection of the snorkel is a little tight and I had to reroute the wires from the mass air sensor. not a big problem.
Date published: 2016-04-10
Rated 5 out of 5 by from Great experience I bought this a few weeks ago and immediately felt better performance , Better Sound , and quicker acceleration overall great experience
Date published: 2016-07-09
  • y_2017, m_10, d_18, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_CAK180, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 67.2ms

Product Questions

Is the Corsa 419950 CAI CARB legal

Asked by: TRY61
This intake is not CARB legal.
Answered by: rk cjpp
Date published: 2017-08-22

Is a tune required for this kit?  Any published hp gains?  

Asked by: Matt Lagodzinski
A tune is not required, no information from the manufacturer about horse power or torque gains.
Answered by: rk cjpp
Date published: 2016-12-20

Is it possible to get this Intake with a dry Filter?

Asked by: Akkarin
It is only available how it is listed.
Answered by: CJPP Dave
Date published: 2017-01-27
  • y_2017, m_10, d_18, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_CAK180, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 24.56ms

You Might Also Like

Product Video

Corsa Cold Air Intake Kit GT 2015-2017 Video Transcript
By Bill Tumas: We’re here with a Corsa Performance cold air intake kit fitting your 2015 through 2016 Mustang GT. This cold air intake kit from Corsa Performance is a great way to add some horsepower, and torque and some better throttle response to your 2015 through 2016 Mustang GT. It will be a direct replacement for your factory air box and will not require a custom tune to install. It features a high-flow filter inside of this sealed Corsa box. It takes advantage of your factory inlet and goes through a smooth inlet into your throttle body itself. All necessary silicone couplers and hardware for installation are included. This Corsa Performance air intake is a great way to add some performance and some sound to any 2015 through 2016 Mustang GT.