Currie Replica 9" Rear Axle Housing Mustang 1965

The K-code Mustang was the only variant from the early body style to utilize a 9" rear end. To capture some of that authenticity for your Mustang, Currie offers this "replica" K-code 9" housing (CE-2000EMR). It features the signature swaged ends of the original, but provides sturdier construction. It's a great choice for street cars with high-HP engines.

Features and Benefits:
– 100% new, 9-inch heavy-duty replica housing without fill plug
- Replica swaged axle tubes made from strong .188 wall DOM tube
- Eliminate the bending issues associated with the OE rear axles
- Swaged tubes from 3" to 2.250" for a classic appearance
- Heavy-duty spring pads are located at the stock position, for a direct bolt-in fit
- Billet small bearing housing ends accept the early stock axles, retainers, and brake hardware

These housings utilize small bearing housing ends, just like the version from the factory. Replica leaf spring pads are installed in the factory location, just like original. It's a direct bolt-in for your stock 8" or 9" housings.

Tech Tip: If upgrading from an OE 8-inch rear axle, a new 9-inch 28-spline third member will be required to complete the installation.

Please Note: This housing is not intended for Concourse level restoration projects, as the weld appearance, vent location, and style differ from the original equipment.