Emblem Kit With Front Pony/Rear GT/5.0 Fender Gloss Black GT 2015-2020
CJ's Part Number:
Emblem Kit With Front Pony/Rear GT/5.0 Fender Gloss Black GT 2015-2019 is rated out of 5 by 49.
You save $5.97
Gloss Black Front Pony, Rear GT and 5.0 Fender Emblem Kit for all 2015, 2016, 2017, 2018, 2019 and 2020 GT Mustangs.
California Residents: Proposition 65 Warning
Rated 5 out of 5 by Anonymous from Fantastic!!!! Bought this a month ago and it looks incredible on my Need for Green GT. If you have the performance pack there are radiators in the way making it almost impossible to reach. Simply look at your replacement emblem and use that as a guide to find the tab on the tail of the horse on your vehicle. I was able to stick my pinky through the grill holes and snap that one off of the car. After that I simply used a plastic pry tool to lift the emblem off from tail to head. Bore out the guide holes if needed, clean and install. You will save many many hours this way as long as you or someone you know can get to that tab with their pinky as opposed to removing anything unnecesarily.
Date published: 2019-06-14
Rated 5 out of 5 by mikengail from Original Ford Blackout Emblems Look Perfect! I had no idea that these were original Ford parts. Too easy to install and I'm very slow and meticulous when working on this car. No taping off or other techniques needed to ensure precise alignment. Side emblems have two raised guides on the reverse side just like the stock emblems for easy and accurate placement. My car was almost TOO yellow, so the gloss black accents really tone it down and help equalize the exterior look of the car. Now all I need is a set of gloss black wheels. Lol...
Date published: 2017-04-16
Rated 5 out of 5 by Bulldogx222 from Looks great The pony and GT were fairly easy. I didn't need to remove the rear panel for the GT. The 5.0 emblems came off easy but get a chair and take your time with the glue residue. Overall it took about two hours. Triple yellow looks mean with the blacked out emblems.
Date published: 2016-12-23
Rated 5 out of 5 by mattb from Great look, fits well It's a bit of a hassle to get the rear decklid emblem on, you've got t remove the whole thing, but it looks great! The pony was a little tight but it really completes the look
Date published: 2016-05-28
Rated 5 out of 5 by PanzerDozer from Easy Install The black emblem kit is great with OEM quality. I would recommend it to anyone that has a white or silver GT. The only thing I would suggest is that you score and pre-bend the GT emblem for the trunk between the "G" and "T". The trunk panel has a slight contour to it and the emblem is flat. Once in place each end of the piece sticks up slightly and does not contact the panel. Otherwise nice parts.
Date published: 2016-12-22
Rated 5 out of 5 by Friction32 from What a difference Glad I bought these. Easy to install and what a difference the Matte Black looks on the gloss black paint.
Date published: 2018-09-01
Rated 4 out of 5 by 2018 GT from Parts were high quality! Delivery took a some time The parts were great! They fit perfectly and look AWESOME. The front emblem was not very easy to get off on my 2018 GT with the performance pack but other then then installation was easy. Unfortunately, the black emblems were on back order so I had to be patient but communication was good and I was somewhat informed of the status. I think the car looks great and I am happy with my purchase
Date published: 2018-06-01
Rated 4 out of 5 by Hab_Nero from Nice look Have a 2018 GT PP1 and was able to remove the grill Pony by breaking the tab on the pony’s tail by reaching through the grill with my pinky. Once that was off I was able to pry the Pony off fully. Wasn’t prepared for the amount of work required to remove the mess under the 5.0 fender badge Heat, goo gone and elbow grease. Not looking forward to the trunk lid GT work when it’s back in stock. It would be good if the adhesive on the back were a little thicker as the Pony’s head and tail in the grill don’t seem to be sticking well enough.
Date published: 2020-03-23
Is it okay to install these on a car if I pull it into the garage while its raining and put it back out in the rain afterwards? or will the adhesive not stick?
Not recommended. You definitely want a dry and warm environment. And if you can give them 24 hours before they are introduced to water or wind, that is always a good idea.
Date published: 2019-05-16
When do you foresee this part being in stock again, and when you ordered it already is there an email I will receive because it’s backordered? Thanks
In stock status is updated in real time and displayed directly below the "Add to Cart" button. If the item is not in stock, please take advantage of the "Email Me When This Product is In Stock" feature. You will be notified by email the moment the product enters the building.
Date published: 2018-05-08
I want the emblems all blacked out. No red for on the 5.0 side emblems. Do you have them without the red dot between the 5 and 0?
You could paint over them if you like.
Date published: 2019-05-16
can you just get the red dots that go on the 5.0
Date published: 2018-03-23
Can i remove the Euro spec Gas Cap type GT Logo on the back and install this gloss black GT Logo on the same holes?
No, the Rear Decklid GT Emblem will NOT cover up all of the mounting holes if you are replacing the round 50 Years Decklid Emblem.
Date published: 2019-03-05
is there an all black emblem kit for the 2014 5.0 GT?
We do not offer a kit for your application.
Date published: 2017-11-20
Will this fit a 2013?
No, this kit is designed specifically for the 2015+
Date published: 2017-06-19
Would the front Pony need the emblem hardware pack? Could not tell from neither the pictures or the video whether or not the pony had the pins to recieve the hardware?
Date published: 2018-09-27