Fan Shroud Plastic 3-1/2" Wide 260/289 1965-1966

CJ's Part Number:
FANS11
Fan Shroud Plastic 3-1/2" Wide 260/289 1965-1966 is rated 3.4 out of 5 by 30.
  • y_2019, m_10, d_15, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_en_US, sid_FANS11, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 113.21ms
  • REVIEWS, PRODUCT

Highlights

  • Fits 20" Radiators
  • Black Plastic Construction
  • 3-1/2In Width
  • Improves Cooling Capacity
$76.99

3-1/2" Wide Plastic Fan Shroud for 1965-1966 Mustangs with a 260 or 289 Engine.

If your 1965-1966 Mustang's 260 or 289 engine has been overheating lately, the culprit could be your fan shroud. Your Pony relies on its fan and fan shroud to keep it nice and cool, especially when you're idling or driving at a low speed. This Plastic Fan Shroud will direct the air flow from your Mustang's fan to the radiator and help prevent your engine from overheating.

Features & Benefits:
- 3-1/2 Inches Wide
- Efficiently Draws in Cool Air Through the Radiator at Low Speeds and Idle
- Reduces the Chance that Your Mustang's Engine Will Overheat
- Enhances the Fan's Cooling Abilities and Aids Minor Cooling Issues
- Offers More Protection from Fan Blades
- Made from Heat-Resistant ABS Plastic

This 3-1/2" Wide Plastic Fan Shroud efficiently draws cool air in through your Mustang's radiator when you're driving at a low speed and when you're idling, which is when your Mustang is the mostly likely to overheat. Made from heat-resistant ABS plastic, the fan shroud enhances the fan's cooling abilities while also offering more protection for the fan blades.

Please Note: Fan shroud brackets are sold separately.

*This fan shroud can also be used on 1965-1966 6-cylinder Mustangs with a manual transmission, but minor trimming will be needed for proper installation.

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ Pony Parts has the parts you need to complete your classic Mustang restoration with ease! CJ’s is proud to offer thousands of reproduction and aftermarket parts to help bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order a replacement 3-1/2" Wide Plastic Fan Shroud for your 1965-1966 Mustang with a 260 or 289 Engine from CJ Pony Parts today!

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Awesome item I installed this in my 66' with a 302 engine and I installed a flex a fan 17" and this item fit perfectly. Yes it's a tight squeeze however there's plenty of room to move around. I'm very happy with this shroud for many reasons. 1: my engine doesn't over heat no more after I installed a new fan - thermostat - new radiator and the final piece I need it which is this shroud! 2; I live in L.A. Traffic here is bad and since now we got the Rams ..... traffic gotten worst -.- but all these changes to operate the engine and keep it cool in a 95 degrees summer day stuck in traffic has been worth my money and time and research and of course CJ Pony Parts customer services.
Date published: 2017-04-29
Rated 4 out of 5 by from Works, but needs work This shroud does the job, but it could be better designed and marketed. First, it comes with no instructions, and requires a special set of mounting brackets. They also come with no instructions, so you have to figure it out yourself. Although the radiator is currently held in place with four symmetrically square holes, two on each side, the shroud holes are not symmetrical. They are offset upwards on the passenger side and downwards on the driver side. The brackets are what do the offset. The offset is there I guess to allow you to get a socket wrench in to attach the underlying radiator-to-frame bolts. But the brackets are thin, flexible metal and bend/distort easy when you attach the fan shroud, which is of flexible black ABS plastic. Odds are that when you finally get the shroud in place, the blades will be touching at some spot, as the bracket alignment and shroud flexibility guarantee some misalignment and out-of-roundness. The four holes on the shroud which hold the shroud to the brackets are elongated vertically, but not enough. In my case, I had to get a drill bit and elongate them even more vertically to allow enough up and down movement of the shroud to keep it away from the fan blades. Fortunately it is soft plastic and reams out easily. Also, even for my three row radiator, the three-row brackets are a little too long and initially placed the shroud 1/4 to 1/8 inch away from the radiator, shaking like crazy. You may need to bend the brackets to reduce the space between the two ears to bring the shroud up against the radiator. A better design would have been to keep the shroud mounting holes in square symmetrical alignment with the radiator mounting holes/bolts and use a long common bolt to hold both the radiator and the shroud in rigid alignment. If I were Scott Drake, I would redesign this to mount better and easier. It would not take much effort. I would also include instructions and/or a video to show how to make adjustments.
Date published: 2015-06-27
Rated 1 out of 5 by from Use ONLY on stock Radiator I bought this for my 1965 mustang coupe with built 303 - 4-speed and 4.11 gears! I'm running the aluminum radiator that everyone runs! I also am running the smaller thin blade 17" flex fan. This shroud does not seal against the radiator! Because of it's position and the gaps at top and bottom, the fan doesn't draw any air through the radiator! You hold your hand behind the shroud, and rev the engine and there is no air current at any RPM! You can actually feel a bit of air going through the front of the radiator! I initially thought I had accidently bought a counter-clockwise flex fan, but that wasn't the case. I ate the $83 I paid for this and cut the shroud in pieces with a die grinder to save all the work of draining and pulling the new radiator! If you're engine has any kind of cam, or is built, use the bigger fan as well! You need as much air going through the radiator as you can get! The other thing is that this is not a high quality shroud, like you'd see on a 69-70! This is a piece of injected plastic that you'd see a cheap kids toy truck made of!
Date published: 2016-04-19
Rated 4 out of 5 by from Fan Shroud This is a install, fit, and modify piece. I took two 1" 16 gauge sheet metal strips and attached them to the radiator frame. I then fitted, drilled and installed the shroud. The only thing I had to do was drill and shape Three holes were the heads of the screw hit the mounting flange of the shroud. I did like the final results. I feel for the work you have to do to make it work it is a little over priced.
Date published: 2016-03-29
Rated 5 out of 5 by from Fit with minor modifications This fan was worth the money. It was hitting my fan at the bottom, but reaming the holes on the sides got it in place where it fit right. It only took a few minutes due it being plastic. It does the job and lowered the temperature around 15 degrees. With temperatures reaching over 100 degrees in Alabama, this was a must. I would recommend. Got on sale for $58
Date published: 2017-07-26
Rated 5 out of 5 by from 65stang I bought Scott Drake Fan Shroud. Easy to install less than 30 minutes Keeps engine from overheating Fast Shipping from CJ Pony
Date published: 2016-09-12
Rated 5 out of 5 by from Great fit I'm very happy with this shroud. It was a snap to install and it has done a great job keeping my 289 cool.
Date published: 2015-01-08
Rated 1 out of 5 by from Doesn't fit a six The shroud is represented as being able to fit a six cylinder with minor trimming. I found this not to be true. While the length was ok ,except for the fact if your car is an automatic the shroud is directly in the way of the transmission lines. The width of the shroud is approximately 2 1/2 inches to wide. I guess if you were in desperate need of a shroud, and didn't mind MAJOR MODIFICATION. You could make it work. I don't need one that bad and for that reason I am returning it.
Date published: 2015-08-25
  • y_2019, m_10, d_15, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_en_US, sid_FANS11, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.91ms
  • REVIEWS, PRODUCT

will the fans11 fit rada21

Asked by: scouter
Yes it will.
Answered by: jmg1
Date published: 2019-09-16

If everything involved is stock, will this shroud work with the 200 6cyl automatic?

Asked by: fatkid
Sorry it will not.
Answered by: rk cjpp
Date published: 2019-06-13

Will your Mustang fan shrouds fit my 65 Ford Galaxie 500 with a small block 289 and small block radiator? Im not having any luck locating one specifically for Galaxies. I would like to have my car run cooler in traffic.

Asked by: Tacoma2017
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: jmg1
Date published: 2018-12-17

WHAT SIZE BLADE CAN BE USED WITH THIS SHROUD DO THE INSTALL BRACKETS ADJUST THE SHROUD LOCATION TO ALLOW FOR 17" BLADES DOES THE SHROUD CLEAR THE TRANSMISSION COOLER LINE LOCATION ON THE BOTTOM OF THE RADIATOR

Asked by: G PRIME
A 17 inch fan will fit but it is tight.
Answered by: rk cjpp
Date published: 2018-11-23

I have an oridgnal 2 core radiator. I just now installed a clutch fan with a 18 " fan blade. Will this shroud work for me on my 289 V8? Thanks. God bless.

Asked by: Scotty2
Sorry it will not work with a 18 inch fan.
Answered by: rk cjpp
Date published: 2019-08-05

Will this fit 1965 Ford galaxie 500 LTD 289

Asked by: 132dna
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: CJPP Dave
Date published: 2018-06-07

How can I tell if I have a 2, 3 or 4 row radiator?

Asked by: 31PKUP
With the engine and cooling system cool, remove the radiator cap and look inside the radiator and count how many rows of coolant tubes there are.
Answered by: rk cjpp
Date published: 2017-08-31

Will this work on a 1965 f100 w/352 engine  and air conditioner?

Asked by: Tom36
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: CJPP Dave
Date published: 2016-12-27
  • y_2019, m_10, d_14, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_26
  • loc_en_US, sid_FANS11, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 134.75ms
  • QUESTIONS, PRODUCT