Firewall With Side Cowl Panels In Weld-Thru Primer Bronco 68-77

Locating the correct sheet metal parts for your classic Bronco may seem challenging. You may even think that you need to waste hours searching through salvage yards for the Bronco parts that you need. We, at CJ Pony Parts, offer a multitude of factory-style replacements like this firewall for 1968-1977 Broncos. The left and right dash panels come with this unit and the upper cowl panel. All mounting and wiring holes have been pre-drilled in the correct locations. Additionally, the firewall includes the master cylinder hole, brake line holes, and parking brake hole all pre-drilled for your convenience. This item saves time if you know you need to replace all of these components, as these pieces come already welded onto this cowl panel.

Features and Benefits:
- Reduces prep time
- Reduced spatter
- Lower distortion of the panels
- Superior conductive properties minimize high heat zone problems
- Eliminates corrosion between overlapped panels or multi-layered spot welds
- Lower resistance at the weld surface into the denser, new steel
- Prevents resin build up between welds

Please Note: The Firewall and Side Cowl Panels come in multiple pieces and will need to be assembled and welded.

*Door strap weld nuts are not included.
*Windshield frame mounting cowl panel is not included.
*Minor modifications will be required to the driver-side airbox drain hole.