Flaming River Power Rack/ Pinion Cradle Kit With Tilt Column Without Pump Mustang With Original Spindles 1967-1970

Flaming River's patented Power Rack and Pinion Cradle Kit (FR300PW1NP) comes with a tilt column, hardware, U-joints, and a wiring connector for 1967-1970 Mustangs with original spindles, although it does not include a steering pump. Study, yet lightweight, the system is incredibly responsive. Not to mention, it retains the full factory turning radius while boasting even more travel than your OE system!

Features and Benefits: 
- New Power Rack and Pinion with Lifetime Serviceability
- Stronger Rack Gear with a One-Inch Diameter
- More than Six Inches of Travel and Full Turning Radius
- Bolts into Existing Chassis with no Suspension Modification
- Fluid and Pressure Tested and Certified

The Power Rack and Pinion Cradle offers the conveniences of modern driving comfort. This is especially noticeable when you park your Mustang. While tight turns and parking spaces would otherwise require laborious turning of the wheel, power steering makes it an effortless experience. 

Kit Includes:
- Mounting Hardware
- Wiring Connector
- Universal Joints
- Patented Rack & Pinion Cradle System

Best of all, the cradle mounts right in the original chassis location and requires no chassis modification. What's more, the center support does not have to be removed.

Please Note: This kit is recommended for a vehicle with a 289/302/351W motor and automatic transmission. If you are not using the original exhaust manifolds, custom headers, or part # EXHD69, Small Block Exhaust Headers may be required for installation of this rack and pinion cradle system.