Ford Pinion Housing Seal 9"

Ford: B7A4669B
CJ's Low Price:
1508544000 2280
When you purchase this pinion housing seal you might be interested in the items listed below.
CJ's Low Price:
CJ's Low Price:
Earn 7 RPM Points What's this?
Ford Pinion Housing Seal 9"
Ford Pinion Housing Seal 9" Ford Pinion Housing Seal 9"

Product Description

Ford 9" Pinion Housing Seal.

When rebuilding your 9" rear end make sure you have all the gaskets and seals necessary for a proper installation. This Ford pinion housing seal gets installed in between the carrier housing and the pinion retainer on the Ford 9" Rear End. Since the Ford 9" Rear Center Section comes in two pieces the proper seal must be installed preventing it from leaking.

- Fits Ford 9" Rear Ends
- O-Ring Style Design
- OEM Ford Part
- High Quality Rubber Construction

With this pinion housing seal being manufactured from Ford you know that all the correct details are in this housing seal. The O-ring design gets installed in the channel of the pinion retainer providing a tight seal. Ford uses a high quality rubber that can withstand heat and won’t break down due to the oils in the rear end. So if you’re in need for a new Pinion housing seal you might want to check this one out from Ford.

The Ford vehicles consists of thousands of different parts. Throughout every generation of the car, the Ford Motor Company has made many of their parts internally, meaning if you're looking to replace a part on your Ford, there's no better source than the OEM parts from Ford. CJ Pony Parts offers hundreds of parts from Ford for all years, so you should have no problem finding exactly what you need.

Purchase a new Ford 9" Pinion Housing Seal from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Axle Bearings, Races & Seals  

Similar Bronco Parts

similar Bronco parts More Axles  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Bronco Applications

This product will fit the following Bronco years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 38.82ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

isthis the same as the 8-inch diff i cant find one

Asked by: colombianzlx1
This will not work on an 8 inch. Here is a link to a kit that includes the o-ring,
Answered by: rk cjpp
Date published: 2016-11-08

Will these seal work for a 1973 mustang grande

Asked by: ccberg8
  • y_2017, m_10, d_20, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_B7A4669B, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 34.68ms

You Might Also Like