CJ Classic Trucks Front Disc Brake Wheel Kit 5-Lug Chevrolet C10 1963-1970
- For 5-Lug Wheels
- Converts Drum to Disc Brakes
- With or Without Spindles
- Choice of Rotor Style
CJ Classic Trucks 5-Lug Front Disc Brake Wheel Kit for 1963, 1964, 1965, 1966, 1967, 1968, 1969 and 1970 Chevrolet C10s.
If you plan to run 15-inch or larger wheels on your 1963-1970 Chevrolet C10, the CJ Classic Trucks 5-Lug Front Disc Brake Wheel Kit offers the necessary clearance. Most early model C10s are switching from drum to disc brakes, and this package completes that conversion with GM calipers, and the choice of 5-lug rotors and spindles.
Features and Benefits:
- Choice of with or without spindles and rotor style
- Optional drop spindles retain suspension geometry and clear brake upgrades
- GM large bore single piston calipers
- 5-lug rotors
*For use with 15"+ wheels.
This kit is available in several configurations. Choose from a kit with 2-inch drop spindles and plain rotors, with 2-inch drop spindles and drilled and slotted rotors, with stock height spindles and plain rotors, or with drilled and slotted rotors and no spindles at all. Choose from plain rotors or drilled and slotted rotors depending on the level of braking you expect or the terrain your C10 drives on.
The optional 2-inch drop spindles lower your C10 by two inches while leaving your suspension geometry completely intact. The upper and lower controls remain attached and clear the single bore large calipers included in this kit.
- Choice of Spindles: 2" Drop Forged or Stock Height
- 5-Lug 12" Rotors (Plain or Drilled/Slotted)
- GM Large Bore Single Piston Calipers with Pads
- Caliper Brackets
- Backing Plates
- Rubber Brake Hoses and Banjo Bolts with Crush Washers
- Grease Seals, Bearings, and Dust Caps
Please Note: Part (DBF301NS) does NOT include spindles or caliper brackets.
- 1963-1970 Chevrolet C10
California Residents: Proposition 65 Warning