ICON Vehicle Dynamics V.S. 2.5 Series Coilover Kit Internal Reservoir Rear Bronco 2021-2024
Highlights
- Rear-Specific Coilovers
- Up to 14" Wheel Travel
- Enhanced Ride Quality
- 100% Bolt-On Installation
ICON Vehicle Dynamics V.S. 2.5 Series Internal Reservoir Rear Coilover Kit for 2021, 2022, 2023 and 2024 Ford Broncos.
These V.S. 2.5 Series Rear Coilover Shocks lift the rear of your 2021-2024 Bronco by 2 to 3 inches for 4-door non-Sasquatch models and 1-1/4 to 2-1/4 inches over stock Sasquatch 4-doors models. They use larger 2-1/2 inch bodies for increased wheel travel up to 14 inches while also enhancing ride quality on or off the road!
Features and Benefits:
- Rear-specific coilover shocks
- Increases wheel travel up to 14"
- Enhanced ride quality over stock
- Tuned for vehicle-specific shock damping and control
- Adjustable up to 2-3" front lift for non-Sasquatch models
- Adjustable up to 1-1/4" to 2-1/4" front lift for Sasquatch models
- ICON-engineered triple-rate coil springs
- CNC-machined 6061 aircraft-grade aluminum shock parts
- CAD-plated 7/8" diameter shock bodies resist corrosion
- FK rod end bearings minimize deflection and extend lifespan
- Fully rebuildable and re-tunable design
- 100% bolt-on installation with no drilling, cutting, or welding
- Made in the USA
These shocks from ICON Vehicle Dynamics allow you to run bigger tires on your Bronco, making for an upgrade to your suspension system. Their triple-rate coil springs improve your vehicle's resistance to bottom-outs by allowing for a softer spring rate when the vehicle is heightened. This all combines to create a more enjoyable ride experience, especially when paired with the same shocks in the front. These shocks (48610) are rebuildable and re-tunable, and they're CAD-plated to resist corrosion over time.
Tech Info:
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Wheels (With Sasquatch Package): 17x8.5" w/ 4.75" Backspace / 0mm Offset
- Recommended Aftermarket Wheels (With Sasquatch Package): 18x9" w/ 5.00" Backspace / 0mm Offset
- Recommended Aftermarket Wheels (With Sasquatch Package): 20x9" w/ 5.00" Backspace / 0mm Offset
- Recommended Aftermarket Wheels (Without Sasquatch Package): 17x8.5" w/ 5.75" Backspace / 25mm Offset
- Recommended Aftermarket Wheels (Without Sasquatch Package): 18x9" w/ 6.00" Backspace / 25mm Offset
- Recommended Aftermarket Tires (With Sasquatch Package): 35" x 12.50" (37" tires require coilover bump stop spacers)
- Recommended Aftermarket Tires (Without Sasquatch Package): 35" x 12.50" (37" tires require coilover bump stop spacers)
- Factory UCAs will not align properly past 2-1/2" of lift. An aftermarket UCA is recommended for lift higher than this.
- When running 37" tires use Up Travel Limiters part #611074 in the rear.
- Recommended Crash Bars part #42000 on non-Sasquatch equipped vehicles when running 35" tires.
- Triple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle. For heavier-equipped Broncos, consider part number 48613.
- Lift height ranges advertised are for 4-door models. Any 2-door models will net approximately 1/2" of additional rear lift over stock.
Vehicle Fitment:
- 2021-2024 Ford Bronco with Sasquatch
*Not compatible with Bronco Raptor.
California Residents: Proposition 65 Warning
Related Categories: Ford Bronco Parts, Bronco Suspension, Bronco Shocks
Installation Difficulty
Intermediate skill is required for this installation.