Ididit Steering Column Tilt Column Shift Automatic Transmission Bronco 1976-1977

When you're restoring a classic 1976-1977 Bronco, upgrading the worn out steering system should be one of your top priorities, and what better part to replace first than the steering column. With a new Tilt Column Shift Steering Column from Ididit, your automatic Bronco will benefit from added comfort and reliability so you can finally enjoy endless miles of smooth cruising and off-road adventures.

Standard Ididit Steering Column Features:
- 8-Position Tilt Function
- OE Style Ford Knobs and Levers
- Ford Wiring Harness
- 4-Way Flashers
- Ford Wiring Plug
- Ford Top Shaft for an Original Steering Wheel
- 3/4"-36 Spline Lower Shaft
- Pre-Welded Under Dash Mount
- Manufactured in the USA
- Comes in a Paintable Steel, Chrome or Black Powder Coated Finish

Ididit's Retrofit steering column for the 1976-1977 Bronco is a direct swap that does not require any modifications for installation to the steering box. The tilt steering column is designed to use your Bronco's original floor mount and comes equipped with Ididit's pre-welded under dash mount for a perfect fit. Ididit incorporates new Ford wiring into every column as well as a Ford top shaft that allows you to use any factory 1966-1977 Bronco steering wheel without the need for an adaptor. The shift pattern on Ididit's column shift steering column allows the use of either a 3 or 4-speed automatic transmission and utilizes your Bronco's original transmission mounted neutral safety switch.

*A new Half Rag Joint (3000383400) is required for installation. The original rag joint was pressed onto the original column and cannot be removed.
*Ididit recommends carefully inspecting the rubber on the other half of the original rag joint to verify it's all intact. If not, you will need to purchase a replacement Rubber Rag Joint Disc (3000941000).
*A shift indicator is not included, but is required for your Bronco's specific transmission.
*A shift linkage (new or original) is also required for installation and will attach to the lower shift arm provided on the column.
*The paintable steel finish is bare, perfect for those seeking to add their own custom finish.

Precise steering is an important aspect of any vehicle. However, in unrestored classic Broncos, "precise" might be the last term used to describe the steering. Aftermarket Bronco parts suppliers like CJ Pony Parts can certainly fix that. One of CJ's brands, Ididit, makes some of the most well made, reliable billet aluminum steering columns on the market.

Order an Ididit Tilt Column Shift Steering Column for your 1976-1977 Bronco with an Automatic Transmission from CJ Pony Parts today!