LED Taillight Assembly 1969

CJ's Part Number: TLLED14
CJ's Low Price:
1508803200 32526
Make sure you get this Two Terminal LED Flasher to ensure your new LED taillight assembly works properly!
CJ's Low Price:
Earn 77 RPM Points What's this?
LED Taillight Assembly 1969
LED Taillight Assembly 1969 LED Taillight Assembly 1969 Play LED Taillight Assembly 1969 Video 1

Product Description

LED Taillight Assembly for all 1969 Mustangs.

One of the best ways to make the rear end of your 1969 Mustang more visible to other drivers, either during the day or at night, is with some new LED taillights. LEDs burn much brighter and much longer than standard bulbs. Upgrading to LED taillights is easy thanks to this LED Taillight Assembly that's available from CJ Pony Parts!

Features & Benefits:
- 108 Super-Bright LEDs
- Polycarbonate High-Temperature Lens
- Uses Factory 1157 Plug
- Fully Sealed Electronics
- Direct Fit Replacement for Factory Lens and Assembly
- Correct-Style Aluminum Trim
- Sold Individually: Not Side-Specific

This LED Taillight Assembly uses 108 super-bright LEDs and your factory 1157 plug, and it features a polycarbonate high-temperature lens with the correct-style aluminum trim. It's fully sealed, so you won't have to worry about it getting damaged or not working due to water or moisture issues. Plus, it's an excellent safety upgrade and direct fit replacement for your factory lens and assembly. This LED Taillight Assembly is sold individually and it's not side-specific, and your Mustang will require two total.

Also, keep in mind that your stock flasher mechanism will not engage correctly because LEDs give off less heat than your original bulbs. You'll need to pick up a Two Terminal Flasher that'll allow your flashers and turn signals to work properly when using these LED-style lights. You'll need one flasher per LED taillight assembly. Please see CJ Pony Parts # HW2811.

Up until recently, almost every bulb on the Ford Mustang has been a dull, yellow incandescent bulb. Not only are incandescent bulbs visually outdated, but they also consume more power and aren’t nearly as bright as their LED counterparts. Be sure to check out CJ Pony Parts for the latest and greatest Mustang LED lighting for your Mustang!

Order an LED Taillight Assembly for your 1969 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More LED Taillights  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
LED Taillight Assembly 1969 is rated 4.5 out of 5 by 2.
Rated 5 out of 5 by from great buy These lights make the car look better and it's definitely more visible day and night.
Date published: 2015-01-08
Rated 4 out of 5 by from Affordable sequential tail lights !! Got these about a month ago & so far happy with them. Very nice & bright. The plastic lenses appear to be good quality & look just like the original ford ones (only difference is they don't have the ford logo). A couple of little "quirks" though which kept me from giving a 5 star rating. First of all, I also purchased the new flasher that you're supposed to use with it. The sequential "rate" is very fast, probably too fast compared to what it should be. If I have a chance, I'll try to add a video of it to the review. Second of all, there's a "mystery wire" that I have no idea what it's for. These are basically "plug & play" BUT, there's this extra wire. The lights seem to operate fine without doing anything with it. The video cj's provides mentions it, but doesn't say what it's for or what you hook it up to. I called cjs' tech support TWICE to get an answer on this. They couldn't figure out what it was for either & BOTH TIMES said they would get back to me with an answer but NEVER DID. (not happy about that, especially with the amount of business, I've been giving them lately).
Date published: 2017-08-30
  • y_2017, m_10, d_22, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_TLLED14, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 41.41ms

Product Questions

I've upgraded my wiring harness to a Painless Wiring Harness, do I still need purchase a Two Terminal LED Flasher as recommended? Or is this for a stock application only?

Asked by: thompa66
You will still need the flasher.
Answered by: rk cjpp
Date published: 2016-11-07

Does it include both sides or are they separate 

Asked by: Murrabit 69
The price is for one side.
Answered by: rk cjpp
Date published: 2016-10-24

What flasher parts are needed to makes these led taillight sworn properly?

Asked by: Orangehorse74
HW2811 is a two terminal flasher that allows your flashers/turn signals to work properly when using LED style lights.
Answered by: rk cjpp
Date published: 2016-06-14

Is part number HW2811 required with this? and if so are two of HW2811 required

Asked by: Morte
Yes, HW2811 is required. You would need two of HW2811 if you were buying two of the LED Tail Light Assemblies.
Answered by: CJPP Dave
Date published: 2016-05-02

will the 1969 LED rear light fit a 1968 mustang as well 

Asked by: EWTD
No it will not.
Answered by: rk cjpp
Date published: 2016-04-25
  • y_2017, m_10, d_22, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_TLLED14, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 32.41ms

You Might Also Like