License Plate Bracket STO N SHO Focus ST 2015-2018

Free Shipping on Automotive Parts
CJ's Part Number: LPB44
MSRP: $94.99
CJ's Low Price:
$84.99
1560729600 61523
Add one of these items to go along with your new License Plate Bracket!
Earn 42 RPM Points What's this?
License Plate Bracket STO N SHO Focus ST 2015-2018
License Plate Bracket STO N SHO Focus ST 2015-2018 License Plate Bracket STO N SHO Focus ST 2015-2018 License Plate Bracket STO N SHO Focus ST 2015-2018 License Plate Bracket STO N SHO Focus ST 2015-2018 License Plate Bracket STO N SHO Focus ST 2015-2018 License Plate Bracket STO N SHO Focus ST 2015-2018 License Plate Bracket STO N SHO Focus ST 2015-2018 License Plate Bracket STO N SHO Focus ST 2015-2018 Play License Plate Bracket STO N SHO Focus ST 2015-2018 Video 1

Product Description

STO N SHO License Plate Bracket for all 2015, 2016, 2017 and 2018 Focus STs.

If your state requires you to have a front mounted license plate, but you are dreading drilling holes in that beautiful ST front bumper of yours, fret no more! The STO N SHO is an aftermarket detachable front license plate bracket mounting system that is designed for your 2015-2018 Focus ST whose appearance would be ruined by use of the factory mounting location. Retain the factory appearance of your ST while abiding by your state laws with this detachable license plate bracket!

Features and Benefits:
- Two-Piece Detachable Mounting System
- Constructed From 5052 and 6061 Aluminum
- Finished in Stealthy Black Paint
- Precision Laser Cut and Hand Burnished
- Long-Lasting, High Quality Design
- Easy Pop-Off Feature for Car Shows/Racing
- Installation Instructions and All Necessary Mounting Hardware Included
- Made in the USA

The best part about this license plate bracket is that you can stay in compliance with state law by simply STOing your front license plate when you want to SHO the beauty of your car. Then, reinstall once you are ready to hit the road.

Once installed, the STO N SHO is easily removed with just the pull of a pin. When the front license plate holder is removed via the pin, the base plate is virtually undetectable under the front bumper.

The STO N SHO is constructed from 5052 and 6061 aluminum. Both plates are precision laser cut and hand burnished. Each tube and rod is machine cut and hand cleaned. After being expertly hand welded and drilled, the parts are assembled and sent to the finishers where the welds are ground smooth. Once the high quality automotive trim black paint is applied, the product is tested to ensure proper operation. A lot of time and work goes into each STO N SHO to ensure you receive a quality part. Manufactured in the USA using quality materials and parts

Please Note: This particular bracket does not fit 2013-2014 Focus STs.

*Requires four holes to be drilled on the underside of the vehicle. These holes are not visible and do not detract from the look of the vehicle.

Order a STO N SHO License Plate Bracket for your 2015, 2016, 2017 or 2018 Focus ST from CJ Pony Parts today!

Similar Focus Parts

similar Focus parts More Body & Appearance  

Focus Applications

This product will fit the following Focus years:

Product Reviews

Write a review
License Plate Bracket STO N SHO Focus ST 2015-2018 is rated 4.8 out of 5 by 26.
Rated 5 out of 5 by from Good way to mount your front plate..... Quality of the bracket seems of good quality and installation is straight forward. However, you won't be able to get a drill underneath to drill the vertical holes so you'll need to raise the front end by about 3 1/2" to give you the clearance necessary. A lift makes it easy, or car ramps or jack stands. I used heavy strength 3M double sided foam tape normally used to secure auto cladding to initially attach it, then followed up with the enclosed screws (with loctite). Be aware that the bottom of the license plate is now about 3/4" lower than the car's stock front lip, so you'll have to be a little more careful coming up to curb stops. But it makes it easy to remove the plate if you don't want to run with it for whatever reason. All in all a slick solution to the front plate issue.
Date published: 2015-10-31
Rated 4 out of 5 by from Good features I hate ruining the lines of a cars front end with a license plate so I ordered this product. I usually run without the front plate since it makes the clean lines of the ST shine to onlookers. It's simple to install, so just store it in the spare tire compartment and put it on when you want...I gave it a 4 star because I thought it was somewhat overpriced, however, the quality is excellent. $20 less and it would have been a 5 star...
Date published: 2017-05-12
Rated 5 out of 5 by from A Must Buy I love it, the dealership I got the car from luckily didn't put the factory bracket on so they didn't drill holes in my bumper and I love where I need a front plate at all times and this is perfect can take it off at any time easily it's a must buy to me install was easy as well
Date published: 2015-09-08
Rated 4 out of 5 by from Looks good Quite expensive for a licence plate mount and It took 3 weeks to get to me, but besides that, it is well built, looks good, easy to install. Didn't have to drill into my bumper which is why i baught it in the first place. Thank you
Date published: 2018-03-04
Rated 4 out of 5 by from Pricey, but great quality This is the second one of these I purchased. The first one I know angled after pulling in too close to a curb. I waited about six months, and finally bit the bullet and bought a new one. this is a very high-quality product and allows you to mount your license plate without drilling holes in the car. It looks nice and is removable if you so choose. I highly recommend it, but it is way too expensive for what it is. You won't find it for less everywhere else though.
Date published: 2019-01-27
Rated 5 out of 5 by from Great solution for dreaded front plates This is a well made bracket... installation was a breeze and it looks slick! I ended up mounting mine more towards the passenger side and couldn't be happier with the look! Now if only they'd pass the law eliminating the need for a front plate in NJ...
Date published: 2017-05-09
Rated 4 out of 5 by from Nice to remove it! Just ordered thursday came on monday very good free shipping. Install was a breeze was scared to tighten to much but i believe its on there nice. Looks great no drilling holes in my bumper period not even the bottom and i wash my car once a week being able to remove it is probably the best feature
Date published: 2018-10-16
Rated 5 out of 5 by from Perfect! I was hesitant to drill holes in my 2018 FoST just to install a mandatory front license plate. I saw this on cjponyparts and had to try it since it mounts to the underside of the vehicle and the plate can be easily removed if needed. I’m so happy I went with this option.
Date published: 2018-10-16
  • y_2019, m_6, d_16, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_26
  • loc_en_US, sid_LPB44, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 42.98ms
  • REVIEWS, PRODUCT

Product Questions

will this work with the rally innovations 3 piece splitter? it does not look like it from photos

Asked by: Seth621
We have not tested those two items together at this time.
Answered by: CJPP Dave
Date published: 2019-03-04

I have a 2013 corvette g.s. the car came with the plate bracket . the mounting bracket for the body isn't there . Can I get just the body mount bracket for my corvette . thanks

Asked by: Frog 1964
We do not offer the parts separately.
Answered by: rk cjpp
Date published: 2018-04-23

Will this fit on a 2014 ST?

Asked by: eMGee
No, you will need P/N: LPB31
Answered by: CJPP Dave
Date published: 2017-04-05

Can you guys confirm if this part works on a 2017 focus st?

Asked by: tripppyj
Not at this time, we have not had a chance to test that fitment.
Answered by: CJPP Dave
Date published: 2017-03-14

Do you guys install at your facility?

Asked by: jmarty320
No. Only on our own vehicles for video purposes.
Answered by: CJPP Dave
Date published: 2016-11-14

I have a 2016 Focus RS and was wondering if you have a timeframe for the version for my car. If you're not to far from me I could offer my car for measurements!

Asked by: TorqueBeast
Available now, P/N: LPB50
Answered by: CJPP Dave
Date published: 2016-09-28

Would this fit a 2016 Ford Focus SE or do you have a bracket just for the regular focus SE?

Asked by: Oezdog
We do not offer a bracket for the SE Focus.
Answered by: rk cjpp
Date published: 2016-03-01

Will you be making a similar bracket for the 2016 Focus RS?

Asked by: Kilovar
Absolutely. As soon as we can get our hands on one for accurate measurements there will be a license plate bracket for the Focus RS, stay tuned!
Answered by: CJPP Dave
Date published: 2015-12-07
  • y_2019, m_6, d_16, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_LPB44, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 183.24ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

License Plate Bracket STO N SHO Focus ST 2015-2018 Video Transcript
By Bill Tumas: We’re here with the STO N SHO Front License Plate Bracket, fitting your 2015 Focus ST.

The last thing you'll want to do to your brand new 2015 Focus ST, is drill holes in the middle of your front bumper cover to mount your license plate. The STO N SHO works great, because this plate here, is going to mount underneath the front bumper. What'll happen, is you attach the license plate to this plate here, so you can easily removable. If you're going to track or show, you can remove the plate. When you go to drive, simply slide it back on and lock it in place, and you're legal for the road.

This STO N SHO license plate bracket is designed specifically for the new front bumper, found on the 2015 Focus ST, and includes all necessary hardware for installation.