Old Air Products Hurricane Complete System Electronic Operated F-100 With Passenger Side Compressor 1967-1972

If you want to update your 1967-1972 Ford F-100's heating and cooling system with an easy-to-install unit, then this complete Old Air Products Electronic Operated Complete Hurricane System from CJ Pony Parts is available now to help you increase the heating and cooling power in your classic truck!

Features and Benefits:
- Custom Block-Off Plate Mounts in Factory Location
- Custom Condensor Assembly
- Engine Specific Application
- Straightforward Installation
- For 289/302 Engines W/Passenger Side Lower Radiator Hose Connection

This Old Air Products Electronic Operated Complete Hurricane System is super easy to install in your classic truck by mounting to the firewall. It mounts using a custom block-off plate using the original heater mounting holes. Once this is complete, the heater and A/C hoses will neatly pass right through the firewall into the engine compartment. The louvers and switching pod will mount along the bottom edge of your dash, allowing an electronic rotary switch to operate the fan, A/C, heat, and defrost functions.

Included with your order are mounting brackets, a receiver, a drier, and pre-formed aluminum lines that pass through the core support. This compressor will come with a plain finish. Depending on the engine application of your vehicle, the supplied A/C hose kit may be either pre-crimped or universal.

Available Options:
- Hurricane A/C System for 1967-1972 F-100s w/o compressor brackets
- Hurricane A/C System for 1967-1972 F-100s w/ a Ford 289/302 engine with a 3-groove crank pulley and an RH lower radiator hose connection
- Hurricane A/C System for 1967-1972 F-100s w/ a Ford 289/302 engine with an RH lower radiator hose connection
- Hurricane A/C System for 1967-1972 F-100s w/ a Ford FE engine 

System Includes:
- Hurricane Heat Cool and Defrost Unit
- Firewall mounting plates
- Electric operated Rotary Fan and Thermostat Switches
- Cables for Heat & Defrost Functions
- Wire Harness
- Under Dash Switching Pod & Louvers
- Duct Hose
- Bypass Heater Valve (Cable Operated)
- Expansion Valve
- Custom Condenser Assembly (for Passenger Side Mounted Compressor)
- Receiver/Drier
- Pressure Safety Switch
- Compressor - Upgrade available for Polished or Chrome Finish
- Compressor Mounting Bracket - (Some engine applications may require an additional charge)
- A/C Hose Kit
- Miscellaneous Hardware

Please Note: 
- For 289/302 engines with passenger side lower radiator hose connection.
- The compressor will mount on the passenger side of the engine.

Vehicle Fitment:
- 1967-1972 Ford F-100 with Passenger Side Compressor