CJ Classic Trucks 4-Wheel Power Disc Brake Conversion Kit 6-Lug Dual Booster Chevrolet C10 1967-1970

A conversion of your 1967-1970 Chevrolet C10's power disc brakes can be made easier than you think with a complete CJ Classic Trucks 6-Lug Front and Rear Dual Power Disc Brake Conversion Kit from CJ Pony Parts!

Features and Benefits:
- Complete kit
- Includes everything needed to convert to disc brakes
- Completes conversion for both front and rear ends
- 8-inch dual brake booster
- Stock-style master cylinder
- Includes necessary brackets and bearings
- 12-inch rotor with 6 x 5-1/2 inch bolt pattern

This CJ Classic Trucks 6-Lug Front and Rear Dual Power Disc Brake Conversion Kit is a complete kit with many different parts that are listed below. These parts should be everything you need to convert to disc brakes on both the front and rear sets of brakes on your classic Chevy! This also includes an 8-inch dual power brake unit. In addition, there is a stock-style master cylinder. This kit uses a 6 x 5-1/2 inch bolt pattern, making it ideal for rims that are 15 inches or larger. Installation is done completely by you thanks to the included necessary brackets and bearings.

Kit Includes:
- Stock Height Forged Spindles
- GM Large Single Bore Calipers with Pads
- Caliper Brackets
- Backing Plates
- Rubber Brake Hoses and Banjo Bolts with Crush Washers
- Grease Seals, Bearings, and Dust Caps
- For use with 15-inch rims or larger
- Works with 6 x 5-1/2 inch Bolt Pattern
- 8-inch Dual Zinc Power Brake Booster
- Powder Coated Black Laser Cut Firewall Bracket
- Brake Pedal Rod Linkage
- 1.125-inch Bore Dual Bail Master Cylinder
- Left Mount Proportioning Valve Kit Disc/Disc
- Includes pre-bent lines and bracket
- 12-inch Rotor
- GM Large Bore Single Piston Calipers with Self-Adjusting E-Brake (1979 Cadillac El Dorado)
- D54 Pads Included
- Caliper Brackets and Spacers
- Bracket Hardware
- Flex Hoses and Clips
- Emergency Brake Cables

Vehicle Fitment:
- 1967-1970 Chevrolet C10