Rear Axle 5-Lug 31-Spline Upgrade 1994-1998

CJ's Part Number: RA32
MSRP: $214.99
CJ's Low Price:
1508457600 28702
A 31-spline rear differential is required to use 31-spline axles.
CJ's Low Price:
Earn 167 RPM Points What's this?
Rear Axle 5-Lug 31-Spline Upgrade 1994-1998
Rear Axle 5-Lug 31-Spline Upgrade 1994-1998 Rear Axle 5-Lug 31-Spline Upgrade 1994-1998

Product Description

Upgraded 31-Spline 5-Lug Rear Axle for all 1994, 1995, 1996, 1997 and 1998 Mustangs with a 31-Spline Rear Differential.

For the Mustang owner looking to modify their rear end to handle the kind of horsepower and torque their car is putting down, look no further. CJ Pony Parts now offers upgraded 31-spline rear axle shafts for 1994-1998 Mustangs. Cars with highly modified engines should have axles that are strong enough to support the power. Instead of taking a chance with your stock 28-spline axles upgrade to these stronger ones from CJ Pony Parts. 

Product Features:
- Upgraded 31-spline axles
- 1541H alloy material
- Fits 1994-1998 Mustangs
- 30" in length
- 5-Lug

Mustangs that have highly modified engines, whether they are naturally aspirated or are equipped with a power adder, may also require upgraded axles. Factory 28-spline axles would most likely not get the job done depending on the power levels you are putting down. Instead of risking a potential problem, upgrade to these stronger, 31-spline axles. These axles will give you peace of mind that your rear end can handle the horsepower and torque of your car with the 1541H composition. 

Especially for vehicles of such age as the SN-95 Mustang, factory axles get worn out over time and can even become a safety hazard. Wear on an axle can soon turn into a damaged axle which can lead to problems. Noises, vibrations, and rattles can arise from damaged axles. Don't wait too long and allow this to happen to you and your Mustang. These concerns are even more severe when you are considering a modified engine.

Please Note: These axles require a 31-spline rear differential.

*Sold individually

Order a 5-Lug 31-Spline Upgraded Rear Axle for your 1994, 1995, 1996, 1997 or 1998 Mustang with a 31-Spline Rear Differential from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Mustang Parts  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.8ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

So it comes with 2 axles right? Cause it say sold individually at the bottom.

Asked by: MR1WILSON1
Sold individually
Answered by: CJPP Dave
Date published: 2017-01-20

Hi, I have Ford Mustang GT 1994 , motor V8 , 5 liters , how I can know I need axle with  31-Spline or  28-Spline ? Mustang still drive but look like I need new axle

Asked by: Edgar
31 spline mostly since its 5.0 and most 5.0 have 8.8 rear end and that comes with a 31 spline axles cause it will rear a 28 spline up
Answered by: Mr1Wilson
Date published: 2016-10-16

What comes with these axels? Bearing and studs? How long are the studs if so?

Asked by: Giantarms
Being that I'm running c-clip eliminators would I still need bearings?
Answered by: Giantarms
Date published: 2016-07-26
  • y_2017, m_10, d_18, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_RA32, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.48ms

You Might Also Like