Rugged Ridge Axle-Back Exhaust System 2-1/4" Black With Dual 4" Tips Jeep Wrangler JK 2007-2018
Rugged Ridge Black 2-1/4" Axle-Back Exhaust System with Dual 4" Tips for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and Jeep JK Wranglers.
Open up your 2007-2018 Jeep JK Wrangler's exhaust with this Black 2-1/4" Axle-Back Exhaust System with Dual 4" Tips from Rugged Ridge. The 2-1/4" mandrel-bent pipes will give your JK's hot exhaust gasses a smooth exit without the constrictions found in crush-bent pipes. This added flow will decrease back pressure and increase your Jeep's horsepower!
Features and Benefits of the Rugged Ridge Black 2-1/4" Axle-Back Exhaust System with Dual 4" Tips (17606.77):
- High-temp black powder-coated finish
- 2-1/4" mandrel-bent pipes
- Improves airflow for increased power
- Comes with required hardware
- Simple installation
- Fits ALL 2007-2018 2-Door and 4-Door Jeep Wranglers
Rugged Ridge manufactures this exhaust kit with a high-temperature black powder-coated finish for lasting durability. The dual exhaust system features slash cut and rounded oval tips for a tough look. It includes all necessary mounting hardware for an easy bolt-on installation.
Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.
Order Rugged Ridge's 17606.77 Black 2-1/4" Axle-Back Exhaust System with Dual 4" Tips for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
Then you just have to remove the muffler from the two rubber hangers. Remove the 15 millimeter nut on the exhaust clamp. Now, we're going to remove this bracket from the rubber hanger on the Jeep. Now, we can move to the other hanger. Once both hangers are disconnected, grab on to the muffler and twist it to break it loose from the pipe, then you can pull it off. With the factory exhaust out of the way, the first thing we're going to do is put the provided clamp over the over axle pipe. We removed both hangers from the Jeep. Now, we're going to install the hangers on the muffler, then install it on the Jeep. WD-40 will help out when removing and installing these hangers. Now, we're going to install this into the over axle pipe, then install the hangers.
Get this hanger installed. Then you can tighten the clamp. Remove the nut from the bolt, and pull the bolt out of the clamp. Spread it apart so you can slide it over the inlet pipe. Then tighten it with a 12mm wrench and a 13mm socket. You're installation's finished. Let's hear it. Our Rugged Ridge axle-back exhaust is installed. It looks so good. I love the blacked out look. It gives our Jeep a nice tone, too, but it's not too loud. Installation will take you about 45 minutes. Before you know it, you'll be heading off-road.