Rugged Ridge Axle-Back Exhaust System 2-1/4" Stainless Steel Polished With Dual 4" Tips Jeep Wrangler JK 2007-2018
Rugged Ridge Polished Stainless Steel 2-1/4" Axle-Back Exhaust System with Dual 4" Tips for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Open up your 2007-2018 Jeep JK Wrangler's exhaust in style with this Polished Stainless Steel 2-1/4" Axle-Back Exhaust System with Dual 4" Tips from Rugged Ridge. You will get a mellow exhaust note which will set your rig apart while simultaneously increasing your JK's performance!
Features and Benefits of the Rugged Ridge Polished Stainless Steel 2-1/4" Axle-Back Exhaust System with Dual 4" Tips (17606.75):
- Durable stainless steel construction
- Stylish polished finish
- 2-1/4" mandrel-bent pipes
- Improves airflow for increased power
- Includes necessary hardware
- Easy bolt-on installation
- Fits ALL 2007-2018 2-Door and 4-Door Jeep Wranglers
This great looking and long lasting polished stainless steel dual exhaust system from Rugged Ridge features 2-1/4" mandrel-bent pipes which give your JK's hot exhaust gasses a smooth exit without the constrictions found in crush-bent pipes. This added flow decreases back pressure and will increase your engine's horsepower!
This is a bolt-on system which installs after your Jeep's rear axle. The dual split exits feature slash cut and rounded oval tips for a tough appearance. This exhaust kit comes with all of the required hardware for a simple installation.
Rugged Ridge manufactures Jeep parts and accessories for the growing Jeep and off-road enthusiast market. Rugged Ridge has designed and crafted thousands of products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year.
Order Rugged Ridge's 17606.75 Polished Stainless Steel 2-1/4" Axle-Back Exhaust System with Dual 4" Tips for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
Tools you'll need for this installation; half-inch ratchet, 15 millimeter socket, 3/8 ratchet, 13 millimeter socket, 14 millimeter wrench, and you might need an exhaust hanger removal tool.
This axle-back exhaust is going to be super easy to install because there's only one 15 millimeter nut holding it on. Then you just have to remove the muffler from the two rubber hangers. Remove the 15 millimeter nut on the exhaust clamp ... Now we're going to remove this bracket from the rubber hanger on the Jeep ... All right, now we can move to the other hanger. Once both hangers are disconnected, grab onto the muffler and twist it to break it lose from the pipe, then you can pull it off.
With the factory exhaust out of the way, the first thing we're going to do is put the provided clamp over the over axle pipe. Then remove both hangers from the Jeep and install both rubber hangers on the exhaust. Then we're going to insert the muffler into the over axle pipe then hang the driver side hanger then the passenger side ... Now we can tighten the clamp on the muffler. Remove the bolt from the clamp ... Then you can spread it enough to get it over the pipe.` Re-install the bolt. Tighten it down with a 13 millimeter socket and wrench ... Your installations finished.
All right, let's hear it ... Our Rugged Ridge axle-back exhaust is installed. It looks really good. It gave our Jeep a nice throaty sound, but it's not too loud. Installation will take you about 30 to 45 minutes, and before you know it you'll be heading off-road.