SPEC Clutch Kit Stage 5 For Use with SPEC Specific Flywheel Focus ST 2013-2018
SPEC Stage 5 Clutch Kit for all 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs with a SPEC Specific Flywheel.
The Stage 5 Clutch Kit utilizes a solid hub like the Stage 4 Clutch Kit but offers the highest possible friction co-efficient. Features an astounding torque capacity of 820. Solid or unsprung hubs don't absorb vibrations and harshness like sprung hubs. Although this clutch can be used on an extreme street car, it is not very street friendly and is best used for drag racing. This non-SAC clutch kit can obtain greater clamping force than the stock dual ass clutch. Once paired with SPEC's lightweight aluminum flywheel, your Focus ST will see quicker revs due to the decrease in rotational mass.
This clutch kit features a non-SAC (Self-Adjusting Clutch) mechanism pressure plate unlike the stock style clutch found on the 2013-2018 Focus STs. Deviating from the original design provides a lighter rotating assembly, higher RPM capability and greater clamp load levels. The kit must be used with SPEC's specific flywheel for this application which features a lightweight, low MOI design and infinite rebuildability. Non-SAC clutch kits offer higher torque capacity than SPEC stock replacement clutch kits of equal level.
Features a full-metallic disc with the highest possible friction co-efficient. This extremely aggressive clutch uses a high clamp pressure plate and solid or unsprung clutch disc. Since there are no springs to absorb vibration, the harshness is absorbed by the drivetrain which is hard on the transmission. The high torque unsprung hub will create clutch chatter and should be used in race applications. The solid 12-rivet hub and assembly is heat treated for strength and durability.
SPEC clutches and flywheels are manufactured on-site using the most advanced methods under the strictest tolerances. SPEC's commitment to making the very finest parts is at the core of what they stand for as a company. Many race teams depend on SPEC parts to help them beat the competition. Whether you're building a street car or a competition vehicle, SPEC offers driveline parts that fit your needs.
*This clutch kit will NOT work with the stock flywheel. The pressure plate in this clutch kit differs from the original Focus ST clutch design and must be used with SPEC flywheel SF33A4.
Order the SPEC Stage 5 Clutch Kit for your 2013, 2014, 2015, 2016, 2017 or 2018 Focus STs with a SPEC Specific Flywheel from CJ Pony Parts today!