Steeda Cold Air Intake Kit ProFlow Mustang GT 2015-2017

If you're looking for a quick and easy way to increase horsepower and torque in your 2015-2017 Mustang GT, you're in luck! CJ Pony Parts now carries this Steeda ProFlow Cold Air Intake Kit! It comes with everything you need for an easy bolt-on installation project, and you'll see plenty of HP and torque gains!

Features & Benefits:
- Outperforms All Other Cold Air Intakes on the Market Today
- Opens Your Mustang's Intake System and Allows it to Breathe More Freely
- More Than 30 RWHP and 23 ft/lb Torque Gain with a Tune
- Increases Power at All RPM Ranges, Not Just at Peak Power
- Lower Intake Air Temperatures (IAT) at Cruising Speed Compared to Competition
- Precision CNC Mass Air Housing for Clean Mass Air Signal that Results in Smooth Off- to On-Throttle Acceleration
- Large Surface Area High-Flow Nanofiber Air Filter and Steeda's Famous "Race-Tested" Velocity Stack Entry
- Advanced Heat Shield and Durable Rubber Gasket
- Easy Bolt-In Installation
- Keeps Sound Tube and Factory Cold Air Ducting
- Includes Cap for Sound Tube Elimination
- Works on Manual or Automatic Transmissions

Tech Tip: For 2017 GT Mustangs manufactured after 9/16, vacuum for the CMCV’s (Charge Motion Control Valves) is no longer picked up from the intake tube. This will require a plug to be used with the unused port/fitting on your new cold air intake tube when installing on all 2017 GT Mustangs built after 9/16 only. The production date on the vehicle (month/year) is located on decal in driver side door jamb.

This Steeda 555-3194 ProFlow Cold Air Intake Kit outperforms just about every other cold air intake kit on the market today! It'll open up your S550's intake system, allowing it to breathe more freely. You'll see more than 30 RWHP and 23 ft/lb torque gains (with a tune), and you'll feel this power gain at all RPM ranges, not just at peak power! This kit offers lower intake air temperatures at cruising speed compared to other cold air intake kits out there. It has a precision CNC mass air housing for a clean mass air signal. What does that mean for you? A smoother off-throttle to on-throttle acceleration! This kit comes with a large surface area high-flow nanofiber air filter, an advanced heat shield and a durable rubber gasket, all of which ensure an easy installation. It keeps your sound tube and factory cold air ducting, but it also comes with a cap for sound tube elimination. You can use this kit on a Mustang with an automatic or manual transmission, making this cold air intake kit one of the most convenient and versatile ones money can buy!

Please Note: This cold air intake is not approved for use in California or states that require a California E.O. #.

*This Cold Air Intake will require you to run an aftermarket tune/calibration, which is not included.

Order a Steeda 555-3194 ProFlow Cold Air Intake Kit for your 2015, 2016 or 2017 GT Mustang from CJ Pony Parts today!