Steering Wheel Reproduction For Generator 1964-1/2
Reproduction Steering Wheel for all 1964-1/2 Mustangs with a Generator.
Replace that old, cracked or worn steering wheel you currently have in your 1964-1/2 Mustang by ordering this Reproduction Steering Wheel currently available at CJ Pony Parts! 1964-1/2 Mustangs had a generator charging system instead of an alternator and this steering wheel is designed to fit with that process. Available in a variety of different colors, this wheel will not only help restore your classic Mustang but also help brighten up your interior.
Features & Benefits:
- High-Quality Reproduction of Original
- Three Spoke Design
- Made with Injected Molded Plastic
- Includes a Machined Mounting Hub
- Makes Use of Factory Horn Button
- Direct Bolt-On Installation
- Available in Multiple Color Options
This Reproduction Steering Wheel is a beautiful reproduction of the original that has been crafted with almost perfect attention to detail. It has a three spoke design and has been manufactured using injected molded plastic, just like the original. The steering wheel includes a machined mounting hub and all of the correct clips to easily mount into place and make use of your factory horn button. This high-quality OE reproduction is also available in multiple color options, allowing you to choose the color that best fits your classic Mustang's interior.
Please Note: The white and ivy gold steering wheels are not Volante products.
Despite its obvious functionality, there's an element of style connected with every steering wheel, so you want the one in your Mustang to look its best, perform well and fit the design of your car. CJ Pony Parts offers many different Mustang Steering Wheels, so you can pick up the exact look you want without sacrificing any functionality.
Go ahead and order a Reproduction Steering Wheel for your 1964-1/2 Mustang with a Generator from CJ Pony Parts today!
Our black plastic steering wheel is an exact reproduction of the original. The horn ring from Scott Drake we're going with has all the detail we've come to expect from their products; the correct paint in the circles, as well as the highly detailed paint in the Ford Mustang as well as the correct logo.
For this installation you'll need a steering wheel puller, 1/2-inch ratchet, short extension, 15/16th socket, 3/8 ratchet, 1/2-inch socket and an adjustable wrench.
See our original horn ring is in really rough shape. All the chrome's off the top here. It's flaking down here. The paint is falling off. Our wheel has this cheap plastic cover on it to cover up all the cracks. It's definitely time for an upgrade.
The first step is going to be to remove our original horn ring. ou'll disconnect your battery before you get started that way the horn's not going off as you remove it. To remove it you simply press in and turn. You'll want to make sure you grab the spring; you'll want to use that with our new pieces.
Now, you're going to remove the bolt that holds the wheel to the column. You'll want to hold the wheel and the wrench kind of at the same time to get it to come off.
At this point, you're most likely going to need a steering wheel puller. Sometimes the wheel may come off. Most times you'll need the puller. Ours isn't budging. We're going to use our steering wheel puller to get it out. We'll start by lining up the plate here. We'll put our screws through. These don't have to be threaded in all the way. You just want them in far enough to get a good grip on the wheel so we can pull it out.
Now we're ready to get our new steering wheel. You want to make sure that you have the wheel as centered as possible when you remove it and install the new one the same way. I'll line up our new wheel, press it down on the spring and put our retaining bolt back on. Now we'll tighten the retaining nut down and again hold the wheel while you turn the wrench. The new horn ring comes ready to install. You line up the three tabs from the retainer with these three openings here and make sure you install the original spring first. Push it flat and you'll feel it pop in, applying pressure, just turn and it'll lock in to place.
Now that our horn ring is installed, we will reconnect our battery to make sure our horn works; (honk honk) and check if the turn-signals cancel and our installation is finished.
Our new horn ring and steering wheel really freshened up the look of our interior. Installation should only take you about half an hour. You'll be back on the road in no time.
This product will fit the following Mustang years: