Taillight Lens Ford Tooling Bronco 1967-1977

CJ's Part Number:
TLL51-V
Only %1 left
Product Description

Ford Tooling Taillight Lens for all 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976 and 1977 Broncos.

When you are restoring your 1967-1977 Bronco, there are many parts that can prove to be difficult to locate. One of these is the taillight lenses. Fortunately for you, you are in luck as CJ Pony Parts now offers this all-new Ford Tooling Taillight Lens that will fit perfectly onto your classic Bronco and is strong enough to survive the test of time.

Features & Benefits:
- Direct Replacement
- Manufactured from Fade Resistant Plastic
- Designed with Ford Tooling Specifications
- Correct SAE Markings & Ford Oval
- Increased Durability
- Available for Driver Side, Passenger Side or Pair for Both
- Officially Ford Licensed
- Made in the USA

This taillight lens is a direct replacement for the cracked or faulty one on your early model Bronco. Completely American made, this lens is manufactured from a high-quality, fade resistant plastic that will provide increased durability, so you won't have to worry about replacing your taillight lens again anytime soon.

Each officially Ford licensed lens features the correct SAE marking & Ford oval, just like the originals. And these are designed with Ford Tooling specifications, so you know fitting it onto your classic Bronco will be a breeze. Available for your driver or passenger side, as well as a pair for both, this Ford Tooling taillight lens will be both an aesthetic improvement along with a safety improvement as well!

Related Categories: Ford Bronco Parts, Bronco Lighting, Bronco Taillights, Bronco Taillight Lenses

Installation & Fitment

Installation Videos

Video Transcript

If you have the original taillight lenses in your F100, chances are they're cracked, leaking, or just not looking their best. Today we're going to replace them in our 1971 F250. These taillight lenses are designed to be a direct fit reproduction taillight lens for your 1964 to 1972 F100. They're made of factory grade fade resistant plastic with the correct SAE markings and the Ford logo, so they'll look and perform just like the originals. These taillight housings are sold separately or as a pair. For more information on them and pricing, click the link in the description down below. Now let's get to the install.

As you can see, our taillight lenses are pretty faded, and they have over spray on them. They weren't taped off the best when this truck was painted. They definitely need to be replaced, and all you need is a Phillips screwdriver. Grab your nice new, shiny lens and place it onto the taillight housing and thread in the screws. It does come with two new screws that look a whole lot better than our old rusty ones. That looks a lot better. We can do the other side.

We got our new taillight lenses installed on our '71 F250. They're looking a whole lot better. They're a lot more glossier. They really do add a nice touch to the rear of this truck, so much so that they make these reflectors look like crab, so we'll have to replace these soon as well. All you need is a Phillips screwdriver, maybe 10 minutes to do this. Before you know it, you'll be heading down the road.

Vehicle Fitment

This product will fit the following Bronco years:

Questions & Answers
Only registered users can ask/answer questions. Please sign in or create an account.
Reviews
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account