TMI Center Console Sport R Full Length Black With Chrome Trim With Factory Air-Conditioning Convertible Mustang 1967-1968
TMI Sport R Full Length Center Console with Chrome Trim for 1967-1968 Convertible Mustangs with Factory Air Conditioning.
This TMI (25-7089-6525-99) Sport R Full Length Center Console with Chrome Trim is a great direct fit upgrade for your Mustang! It features chrome trim along both its sides that separates the premium-quality black vinyl on the bottom from the nice-looking black unisuede above. This center console also has multiple storage compartments, 2 cup holders, a map pocket, a padded armrest and a cubby hole that can easily be removed if you want to add more components. Plus, it comes with your choice of French seam contrast stitching! Easy to install, this center console simply rests on your transmission tunnel with no modifications needed and is proudly made in the USA.
Features and Benefits:
- Center-to-Front Chrome Trim
- Premium Black Vinyl & Black Unisuede
- Variety of Contrast French Seam Stitching Color Options
- Extends from Back of Front Seats to Center of Dash
- Multiple Storage Compartments
- Two (2) Cup Holders and Map Pocket
- Hidden Console Hinge Flips Open for Storage
- Comfortable, Padded Armrest
- Removable Front Cubby Hole
- Fits Automatic or Manual Transmission
- Made in the USA
Vehicle Fitment:
- 1967-1968 Convertibles with Factory Air Conditioning
Please Note: The TMI Full Length Center Console will have the Shifter Hole Cut out in the Fiberglass, but will require the Vinyl on top of the Full Length Center Console to be cut by the customer.
Related Categories: Mustang Parts, Mustang Interior, Mustang Consoles, Restomod Parts, Restomod Interior
Installation Videos
Video Transcript
Shown here is a '64-'66 deluxe console. All deluxe consoles will have this chrome trim going around the edges here. The '65 -'66 will be two-tone to match the Pony interior. The '67-'68 will all be solid colors to match your deluxe interior. All of TMI's full-length consoles have the exact same features, in the front a nice: deep storage pocket that can be removed. You can install a doubled-in stereo. They have a cutout that will fit both a manual or automatic shifter, a pair of deep cup holders, and in the back a large storage bin with a pocket in the back for a map and removable storage.
The console fits really tight to our transmission tunnel as well, as under the dash, so to install it, it's going to require us to remove our shifter. If you have an automatic, there's going to be a retaining bolt in the back of the T handle. Remove the T handle first, then you remove the bolt for the handle. In the case of our 3-speed, there's only two 1/2" bolts to hold the shifter to the transmission, that we're going to need to remove to remove our shifter. You also want to check under the dash in this area here to make sure there are no bolts or ground sticking out that could damage the console when you install it.
We'll slide our boot up out of the way. We're going to push it forward to access the rear bolt. Get it down into place between the seats. Simply slide it forward. It is a tight fit, like I said, under the dash. Give it a couple bumps, get it lined up with our shifter opening. We're going to reinstall our shifter. And our installation's finished.
Our TMI full-length console looks great and gives us all the amenities you'd find in a modern console. Installation is straightforward, and takes about 10 to 15 minutes. You'll be back on the road in no time.
