Trigger Accessory Control System Solid State With Wireless 6-Switch Remote



  • All Solid State Internals
  • Accessory Control System
  • Includes Wireless Remote
  • Remote Features 6-Switches
MSRP $679.99
You save 39%

Trigger Solid State Accessory Control System with a Wireless 6-Switch Remote.

Looking to add some new functions to your vehicle? Maybe you want to activate some of your installed accessories while you’re standing outside of your vehicle, or maybe you want to add some dimming functions for any lighting you have installed? Either way, you’ll definitely want to take a closer look at this Trigger Solid State Accessory Control System with a Wireless 6-Switch Remote from CJ Pony Parts! 

Features and Benefits:
- Substantially Saves Installation Time
- Eliminates Need to Run Wires Under Dash or Through Firewall When Wiring Accessories
- Adds Functionality Like: Remote Control for Activating Installed Accessories from Outside Vehicle, Dimming/Flashing Functions for Installed Lighting, Fused Circuits with LED Indicators to Notify of Blown Fuses and More
- RF Remote Uses Universal Mounting System that Accommodates Round and Flat Surfaces
- RF Remote Switch Pad Usable Inside or Outside Vehicle
- Remote Has Backlit Buttons and is Battery-Powered to Make Wiring Even Easier
- Remote is Programmable for Security or for Use with Additional Remotes
- Control Backlight Color in RF Switch Pad
- Several Trigger Control Boxes and Remotes Can be Used Together to Control Up to 24 Accessories
- When Mounted to Roll Bar Buttons on Remote are More Easily Accessible than Dash Switches: No Straining Against Seatbelt to Reach Dash
- Bluetooth App for Android and iOS (Control from Phone or Tablet): Simple to Set Up and Allows for User Customization, Use It to “Trigger” Lights On from Outside Vehicle or for Whatever You Need to Activate On Demand
- Bluetooth App Controls On/Off, Dimming Functions and Flashing/Strobe When Used with LED or Conventional Lighting
- Battery Voltage Shows in App Screen
- 6 Channels, 2 x 30 Amp Circuits, 2 x 10 Amp Circuits, 2 x 5 Amp Circuits
- All Solid State and 12-24 Volt
- Manual Buttons for On/Off on Top of Case
- Switch Panel Can be Hard Wired
- Low Voltage Cutout to Shut Down Trigger if Battery Voltage Gets Low
- 100-Amp Fuse Installed on Positive Input Wire for Protection
- Fuse with Built-In Waterproof Cover (30 amp - 1 and 2, 10 amp - 3 and 4, 5 amp - 5 and 6)
- LEDs Indicate Relay On and If Fuse is Blown, Blue for Circuit On and Red for Blown Fuse
- Waterproof Case Design Withstands Temps to 250 Degrees F and Below Freezing
- 3 Wires, Ground, Switched Positive, Battery Positive
- 2.4 GHz Frequency Hopping RF Connection to Control Box
- Replaceable Battery Power and/or 12-Volt Hard Wired Option for Backlit Switches
- Customizable Names for Each Channel
- Includes Six 8' Wire Harnesses, Two 12 Gauge, Two 14 Gauge and Two 18 Gauge 

This Trigger (TRI3001) Solid State Accessory Control System with a Wireless 6-Switch Remote is easy to install and easy to use! It eliminates the need for you to run wires under your dash or through the firewall when you’re installing accessories, and it comes with a remote that uses a universal mounting system that you can use on flat or round surfaces. You can use this remote inside or outside of your vehicle too! You can even mount this remote on your roll bar, which will make it more accessible and easier to use than if you mount it to your dash. This accessory system is solid state and runs 12 to 24 volts, and the switch panel can be hard wired if you prefer. It also has a waterproof case that can withstand extreme temperatures. This system includes six 8' wire harnesses and more!

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following F-150 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account