Upper Control Arm Assembly 1965-1966

CJ's Part Number:
UCA1
Upper Control Arm Assembly 1965-1966 is rated 4.4 out of 5 by 8.
  • y_2019, m_12, d_10, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_UCA1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 47.22ms
  • REVIEWS, PRODUCT

Highlights

  • Direct-Fit Reproduction
  • High-End Riveted Ball Joint
  • Black Powder Coated Finish
  • High-End Materials
MSRP $75.99
$69.99
You save 8%

Upper Control Arm Assembly for all 1965-1966 Mustangs.

Does driving your classic 1965-1966 Mustang feel like you’re almost always on a rocky road? Upper control arms will fix that “hay ride feeling” that you may grudgingly be dealing with. Connecting your suspension to your pony’s frame, this upper control arm will move up and down seamlessly, so your tire can properly travel. This excellent new Upper Control Arm Assembly will “absorb the road” and have you enjoying that smooth Mustang ride again in no time flat.

This quality reproduction is a direct replacement for your original upper control arm. It features a black painted finish to resist corrosion and is universal to fit either the driver or passenger side. Your pony's suspension is not someplace you want to take a risk, so trust CJ Pony Parts to deliver the best possible quality at the most affordable price!

Upper Control Arm Assembly Features and Benefits:
- Includes shaft, bushings, ball joint, grease fittings and cotter pin
- Individually sold for either driver or passenger side
- Reproduction directly replaces factory original
- Black paint finish is corrosion resistant
- High-end materials for a longer lifespan
- Assists in eliminating feeling every bump on the road

Please Note: Two of these individually sold upper control arm assemblies are required in order to complete both driver and passenger side of your classic coupe, convertible or fastback Mustang.

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has what you need to complete your classic Mustang restoration with ease! CJ Pony Parts has all the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order an Upper Control Arm Assembly for your 1965-1966 Mustang from CJ Pony Parts today!

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Great buy Bought these to replace originals during Shelby drop. Everything fits well, paint is perfect, bushings and ball joints move freely
Date published: 2016-02-07
Rated 5 out of 5 by from great feature this part is exactly the same than the original ...
Date published: 2016-01-28
Rated 4 out of 5 by from Good fit These are an exact match to the originals. One of mine got scratched up by the other during shipping, but I was able to clean it up.
Date published: 2015-01-07
Rated 4 out of 5 by from Good fit Bolted right in. My only complaint would be that there are no boots on the inside of the cross shaft pivot "bushings". Seems like these may require grease a little more often than the old set that I removed which had dust boots. Not quite worth taking apart and installing boots, though, so I bolted them right in as-is and lubed up everything. Oh, and it would be nice if they included 90* zerk fittings instead of straight so they can be lubed in the car. I just re-used my old 90* fittings.
Date published: 2019-02-12
Rated 5 out of 5 by from Upper Control Arm Quality part and fitted very well. Came with a grease fitting for ball joint and the pivot shaft.
Date published: 2015-08-16
Rated 4 out of 5 by from Great discovery! Glad I found a great place to make my online purchases. I'm new to the classic Mustang world.
Date published: 2017-02-16
Rated 5 out of 5 by from looks good Putting new parts on the car so it looks great. Replacing old ones.
Date published: 2015-07-24
Rated 3 out of 5 by from At least one came good Had press the bolts out of one top bushing and center it because it wasn't centered properly. Other than that they look pretty good for the $. Make sure you check it when you get it.
Date published: 2018-12-02
  • y_2019, m_12, d_10, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_UCA1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.81ms
  • REVIEWS, PRODUCT

Are both the left and right upper control arms the same?

Asked by: whileee
Yes they are.
Answered by: rk cjpp
Date published: 2019-05-20

are the upper control arms the same on 6cyl and v8

Asked by: a1golfer
No they are not due to the added weight . Check your OEM specs. They may fit but they are not the same.
Answered by: Mongo614
Date published: 2019-03-10

Hi, I'm noticing in the pictures and videos that there aren't holes for the coil spring saddle. Is it just a bad view of that spot or do I have to drill them out?

Asked by: StarDiero75
They come with the coil spring saddle holes.
Answered by: rk cjpp
Date published: 2017-07-06

Would this work for a V8 engine on a 1966 mustang?

Asked by: JulieMustangMOM
Yes, Please read above comments. It was answered.
Answered by: Ptaka69
Date published: 2016-09-20

are they scott drake,can you get a complete set uppers and lowers made by scott drake

Asked by: dad64stang
These are not Scott Drake. Take a look here: http://www.cjponyparts.com/catalogsearch/result/index/?brand_name=Scott+Drake&product_model_type=Mustang&product_type=Front+Control+Arms&q=scott+drake+control+arms
Answered by: CJPP Dave
Date published: 2018-11-05

hi is there any difference between a 65 and 67 upper control arm

Asked by: v8len
Yes they are very different.
Answered by: rk cjpp
Date published: 2018-11-05

will these also fit a first generation Falcon ? I know 1st gen Mustang and Falcon are pretty close suspension

Asked by: BIIman
It may, but we haven't tested it to know for sure.
Answered by: CJ Pony Parts
Date published: 2015-07-27

What model mustang does apc SG25 upper control arm fit 

Asked by: roger72
This part fits 1964.5, 1965 and 1966 Mustangs.
Answered by: CJ Pony Parts
Date published: 2016-03-16
  • y_2019, m_12, d_12, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_UCA1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 89.53ms
  • QUESTIONS, PRODUCT
Complete Your Package
Add to Cart