Vortech Supercharger Kit V3 JT-Trim Black With Air To Air Cooler Mustang GT 2018-2023

The Vortech Black V3 JT-Trim Supercharger Kit 4FQ218-234JT includes an Air to Air Cooler that will boost your stock 5.0L GT to 692 horsepower and 584 LB/FT torque with 7.5 to 8.5 PSI from the V-3 JT-Trim Supercharger at factory redline using CA 91 Octane fuel. Next-level performance for your 2018-2023 GT Mustang starts with JT-Trim's patented oil control system, air-to-air charge cooler and replacement fuel system. Each assembly is a high-quality, complete kit for a total conversion that is controlled by a handheld programmer.

Features and Benefits:
- Black Finished V3 JT-Trim Compressor with 3.60” Drive Pulley
- Manifold Boost Pressure: 7.5-8.5 PSI @ Redline
- Supplied Handheld Programmer Re-flashes ECM with Vortech Calibration for 91 Octane Fuel
- High-Flow Roto-Molded Airbox Ducting
- Dual-Plate Supercharger Mounting System
- 24” x 13” x 3.5” Air-To-Air Charge Cooler
- Lightweight Efficient Charge Tubes
- Configured "Blow-Through" MAF Housing

Upgrade the efficiency of your airflow with a "blow-through" MAF housing on lightweight charge tubes. The enlarged air-to-air cooler features high flow components, like roto-molded ducting to literally blow away the competition. Industry-leading 76% adiabatic efficiency (SAE J1723 standard) means less heat generated, drive power is reduced and more net power is produced.

Included:
- Fuel Rail Spacers
- High Flow Replacement Fuel Injectors
- Vortech Maxflow Plug-and-Play Fuel Pump Voltage Booster
- Air-To-Air Charge Cooler
- Mandrel-Bent 3”/3.5” Aluminum Charge Tubes
- 98MM MAF Housing with Integrated Air-Straightener Upstream
- Vortech Maxflow Race Bypass Valve with Filter
- OEM Airbox Ducting
- OEM Replacement K&N Panel Filter
- Stainless Steel Clamps
- Silicone Sleeves and Reducers
- PCV and Breather Hose Provisions
- Replacement Engine Coolant Pipe and Hose Assemblies
- Engine Coolant Reservoir Replacement Assembly
- Supercharger Mounting System: Idlers, Drive Belt and Hardware

*Mount features multiple idler position locations for a wide range of belt and pulley fitments.

Vehicle Fitment:
- 2018-2023 GT Mustang

Fitment Note: This kit is NOT designed for use with Bullitt, Mach 1, Shelby GT350 or GT500 Mustangs.