Wilwood Front Brake Kit 12.88" Dynapro Drag 4-Piston Anodized Mustang V6 2015-2017/ EcoBoost/ GT 2015-2023

Looking to enhance your braking capabilities? Wilwood to the rescue! Their Anodized Dynapro Drag Four-Piston 12.88-inch Front Brake Kit (140-14103) is optimized for drag applications with occasional street use. Lightweight rotors, aluminum rotor hats, and DynaPro four-piston calipers create generous weight savings ideal for a drag 2015-2017 V6 or 2015-2023 EcoBoost or GT Mustang. 

Features and Benefits:
- Improved Front End Braking Capability  
- Hard-Anodized Four-Piston Front Calipers
- Race Brake Kit
- 12.88-inch Slotted Rotors
- Aluminum Rotor Hat
- Proudly Made in the USA
- Bolt-On installation

Wilwood uses GT48 directional vane Spec 37 alloy vented iron rotors that measure 12.88” x .81” and weigh in at a mere 10.2lbs each. These slotted rotors offer durability and thermal stability to meet performance demands. To mount the rotors to the OE hubs, you'll use Wilwood's forged aluminum rotor hats. 

Specifications:
- Spindle Type: Factory Disc Spindles
- Mount Type: Radial
- Caliper Type: Four-Piston Calipers (Anodized Gray)
- Rotor Diameter: 12.88"
- Min Wheel Diameter Required: 17"

The slotted rotors pair nicely with Wilwood's radial-mount DynaPro four-piston aluminum caliper, which weighs only 4.1lbs. The calipers provide reliable clamping force and use BP-20 compound SmartPads for high response and holding power when cold, and resistance to fade when hot. E-clip style pad retaining pins allow convenient access to the pads without needing to remove the calipers from the mount. Finishing off the calipers are stainless steel pistons, internal bore seals and stainless steel bridge wear plates.  

Wilwood's upgrade is available in a complete front disc brake package for your drag-racing S550. Installation is quick and simple thanks to a 100 percent bolt-on design that mounts to the OE spindle and hub. 

Vehicle Fitment:
- 2015-2017 V6 Mustangs
- 2015-2023 EcoBoost Mustangs
- 2015-2023 GT Mustangs

Please Note: Wilwood recommends using a stainless steel braided flexline kit with this 12.88-inch front brake kit. A 17-inch or larger wheel is also recommended to ensure proper clearance.