Zone Offroad Products Suspension Lift Kit 6" 4WD F-150 2015-2020

Zone Offroad Products:
F46N
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 120.28ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
MSRP $1,363.59
$1,295.41
You save $68.18

Zone Offroad Products 6" Suspension Lift Kit for all 2015, 2016, 2017, 2018, 2018 and 2020 4WD F-150s.

Finding suspension upgrades for the newly redesigned 2015-2020 4WD F-150 was easier said than done until Zone Offroad Products released this new F46N 6” Suspension Lift Kit. This new suspension lift kit has all of the great features of the previous designs packed into a system that will work with your F-150’s aluminum body.

Features and Benefits:
- Front and rear heavy duty 1-piece lower control arm crossmembers
- Massive ductile cast iron steering knuckles
- Full differential relocation bracket system included to properly correct CV shaft angles
- Includes bolt-on strut spacers
- Strut disassembly not required
- New eccentric cam bolts included for easy alignment
- Includes sway bar relocation brackets to achieve optimum position for sway bar
- 1/4" thick differential skid plate included
- 5" Rear Blocks with integrated bump stop wings to achieve a more level stance
- Rear Nitro shocks Included
- Max recommended tire size: 37”x12-1/2”

Specifications:
- Front Lift Height: 6″
- Front Lift Method: Strut Spacer
- Rear Lift Height: 5″
- Rear Lift Method: Blocks
- Install Time Hrs: 8-10
- Difficulty Level 1-5: 4
- Wheel Size: 18”x9”
- Back Spacing: 5”-5-1/2”
- Max Tire Size: 37”x12-1/2”
- Wheel Size: 20”x9”
- Back Spacing: 5”– 5-1/2″
- Max Tire Size: 37”x12-1/2”

This suspension lift kit is built around two heavy duty one-piece lower control arm crossmembers and massive ductile cast iron steering knuckles. Differential relocation brackets will move the front differential to achieve perfect CV angles while still allowing for the factory front driveshaft to function normally. Bolt-on strut spacers achieve the 6" lift without requiring disassembly of the factory struts to install. New eccentric cam bolts make adjusting the alignment easy while sway bar drops adjust the sway bar to its optimum position. A heavy 1/4" thick differential skid plate protects the underside when you hit the off-road trails.

Cast iron lift blocks with integrated bump stop wings provide 5" of lift under the back-end to level out your 2015-2020 4WD F-150. Rear nitro shocks finish out the installation and provide enough clearance for a maximum sized tire of 37”x12-1/2”.

Please Note: Vehicles equipped with a 2 piece rear driveshaft and carrier bearing may require carrier bearing drop kit # D5405. Kit includes a 5" rear block kit.

Tech Tip: Requires frame bracket modification. 18" wheels with 5”-5-1/2" of backspacing should be test fit prior to mounting tires to ensure proper tie rod end clearance. 18" or larger diameter wheels required. Stock 17"/18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60R20 tire. 37”x12-1/2” tires may require some trimming.

Order this Zone Offroad Products F46N 6" Suspension Lift Kit for your 2015, 2016, 2017, 2018, 2019 or 2020 4WD F-150 today from CJ Pony Parts.

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following F-150 years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.58ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 118.93ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;