Classic Auto Air Engine Fan Blade 16" 6-Cylinder With Air Conditioning 1965-1967

Classic Auto Air: 9-112
MSRP: $76.25
CJ's Low Price:
$73.99
1472169600 4154
Purchase the proper spacer you need when you install this fan blade on your 1965-1967 Mustang.
CJ's Low Price:
$17.96
Qty
Earn 73 RPM Points What's this?
Classic Auto Air Engine Fan Blade 16" 6-Cylinder With Air Conditioning 1965-1967
Classic Auto Air Engine Fan Blade 16" 6-Cylinder With Air Conditioning 1965-1967 Classic Auto Air Engine Fan Blade 16" 6-Cylinder With Air Conditioning 1965-1967
Classic Auto Air

Product Description

Classic Auto Air 16" Engine Fan Blade for 1965, 1966 and 1967 6-Cylinder Mustangs with Air Conditioning.

Is the cooling system on your 6-Cylinder Mustang need some attention? Replace that old 4 blade fan and replace it with this high quality 6 blade fan from Classic Auto Air today! This engine fan blade is designed to work with 1965-1967 Mustangs with a 6-Cylinder engine that is equipped with air conditioning.

The fan blades feature rivets that get mounted toward the front of your Mustang to cool down the radiator. The tilted blades provide the perfect amount of cool air flow when sitting or driving. When you add 2 more blades to the fan provides better air flow when your Mustang is stationary.

Features:
- Fits 1965-1967 Mustangs
- Six Fan Blade Design
- 16 Inch in Diameter
- Fits 6-Cylinder Mustangs
- Works with Air Conditioning Systems

Please Note: This fan blade from Classic Auto Air is designed to be used without a fan shroud.

If your Mustang's engine isn't at the right temperature, it's not going to perform properly. Similarly, if you're not comfortable when driving your Mustang, you're going to not want to drive it anymore. That's what makes your Mustang Heating and Air Conditioning system so important. CJ Pony Parts has every part you need to keep these vital systems in your Mustang running in perfect condition.

Purchase a new Classic Auto Air 16" Engine Fan Blade for your 1965, 1966 and 1967 6-Cylinder Mustangs with Air Conditioning from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Fans & Fan Shrouds  

Installation Instructions

Difficulty

Difficulty: Moderate

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Classic Auto Air Engine Fan Blade 16" 6-Cylinder With Air Conditioning 1965-1967 is rated 3.3333333333333335 out of 5 by 3.
Rated 5 out of 5 by from perfit fit The fan is much better than the original 4 blade. Be advised that you will have to swap out the original fan spacer with a 1 inch spacer,this is due to the additional pitch of the blades on the 6 bla
Date published: 2015-08-19
Rated 1 out of 5 by from Incorrectly named See the description of this blade? It measures 16-7/8" tip to tip. The one that I just rec'd has a red label, as shown, but calls the blade to be a 16" fan blade. Your bad!
Date published: 2016-03-24
Rated 4 out of 5 by from good very good product, professional and very ligth, must for my old mustang
Date published: 2015-06-11
  • 2016-08-25T07:57CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_CAA9112, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 29.15ms
  • REVIEWS, PRODUCT

Product Questions

Is this a clutch fan?  Will fit a 68 with I6 or is there a comparable one?  If not a clutch fan do you have one for a 68 I6 with AC?

Asked by: Winch
This is an engine cooling fan and only fits 1965-1967 Mustangs. Look up CJ part # FAN40.
Answered by: CJ Pony Parts
Date published: 2015-09-29

Will it work with no air. It overheat but, not fluid loss. Stalls out, hard to restart and when it does, stalls out again. Really bad.

Asked by: 6 BANGER
No, it requires Mustangs with air conditioning.
Answered by: CJ Pony Parts
Date published: 2015-09-10

Will it work with 1965 v8? Thanks

Asked by: Pepe Cortina
No, it's for 6 cylinder Mustangs only.
Answered by: CJ Pony Parts
Date published: 2015-08-21

would this 16" fan work on 64 ranchero 302 v-8 , present fan is 17" and too close to upper radiator hose

Asked by: old blue

I had to replace the OEM 2 row rad with a 4 row to help the 50 yrs old cooling system to work, better. So, will I need the change the spacer that I bot to enable the fan to fit the new thinner shroud?

Asked by: Punk84
  • 2016-08-25T08:31CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_CAA9112, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 28.53ms
  • QUESTIONS, PRODUCT

You Might Also Like